| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Tyre size on a sprinter
|
Tue, 11 March 2003 06:28
|
 |
HEy Guys..
whats the widest tyre size you guys put on?
Ive got 205/60/13 and its scrubbing on the inside of the guard.
|
|
|
Location:
Eskilstuna, Sweden
Registered:
May 2002
|
|
Re: Tyre size on a sprinter
|
Tue, 11 March 2003 07:30
|
|
The thirteen inch wheel your using is it the standard Sprinter one? Ergo, has the standard offset?
Cheers
|
|
|
Location:
sydney
Registered:
January 2003
|
|
Re: Tyre size on a sprinter
|
Tue, 11 March 2003 07:34
|
|
|
i use 205/50/15 on deep dish wheels and it rubs on the outside of the wheel if i go very fast over speed humps or pot holes .
|
|
|
Location:
Sydney
Registered:
July 2002
|
|
Re: Tyre size on a sprinter
|
Tue, 11 March 2003 08:59
|
|
No its not the standard sprinter wheels dude..
i was planning to roll the guards..but not sure if it will work or am i just wasting my money.
|
|
|
Location:
sydney
Registered:
January 2003
|
|
Re: Tyre size on a sprinter
|
Tue, 11 March 2003 09:02
|
|
roll your guards !!
its all worth it
if u stick to your stockies u go sideways in the wet without trying.
i am getting my guards rolled but don';t know where
if u do happen to roll it can u suggest or direct me to a place too thanks .
|
|
|
I Supported Toymods
Location:
perth
Registered:
September 2002
|
|
Re: Tyre size on a sprinter
|
Tue, 11 March 2003 15:09
|
|
im after some rims for my mates sprinter, but don't know crap all so could someone quickly bring me up to speed.
205/60/13
means 205mm width, 60mm tyre height to rim, 13??
Also with that offset stuff between bolt holes ive heard 114, 100 before. Whats the ae-86 stud pattern offset?
Cheers 
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Tyre size on a sprinter
|
Tue, 11 March 2003 23:49
|
|
206/60x13 means:
- 205mm tread width
- 60 profile sidewalls, which means the sidewall height is 60% of the tread width
- 13" rim diameter.
Offset and stud pattern are two different things. The stud pattern (often called PCD or Pitch Circle Diameter) is 114.3mm (4.5") for most RWD Toyotas, including the AE86. The offset is the distance between the hub mounting face and the centre line of the rim.
|
|
|
Location:
Sydney
Registered:
July 2002
|
|
Re: Tyre size on a sprinter
|
Wed, 12 March 2003 03:32
|
|
Hey sprintr,
Im going to get my guards rolled next week.I looked on the bigotyres website (In Moorebank next to Jetspeed) and they charge $40 per guard.Ive asked around and they are the cheapest. So im going to give them a visit next week and get my rear guards rolled.
Thanks for the help guys
|
|
|
