| Author | Topic |
|---|
Location:
Gold Coast
Registered:
May 2002
|
|
|
Location:
Brisbane, QLD, Australia
Registered:
May 2002
|
|
Re: Roll Call!
|
Tue, 25 June 2002 00:49
 
|
 |
Ok, I'll bite.
YEAR/MODEL
1995 Holden apollo. (widebody camry)
ENGINE
5sfe
Stuff done:
k&n panel replacement
Stuff planned to be done:
Replacement air pipe from box to throttle body
Enlargement of throttle body internals
Oil cooler for auto transmission
Air conditioner
4-2-1 extractors and piping up to cat.
Better head unit. Maybe a JVC mp3.
Better front door speakers and better rear 6x9's with a 2 channel amp.
Stuff maybe to consider:
Lowered 1/2 - 1" OR 15" wheels
LSD
But it can't all be chest beating, so as for me, I live on the northside of Brisbane way up at pine rivers shire. 
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
|
Banned member
Location:
Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Tue, 25 June 2002 09:39
|
|
alright
i have a ta22 celica wreck, blah 
i have a ta22 for sale in the for sale section if anybody is interested
i have another ta22, blue metallic with lilac pearl
installed suzuki sierra seats
lowered suspension three inches allround
waiting on reasembly of 3tgte motor then installing when i get round to it
also a ra65 celica, looks like it is on stilts, unlowered
just been painted though i am not 100% happy with this and soon to be repainted red tupac with blood red pearl
installed nissan silvia seats
interior is slowly being customised
4-2-1 extractors into 2.5 exhaust, walker turbo muffler dumps at the diff so it cant be seen from the back of the car
uni filter installed
22re motor done 65,000 kms since new
nissan skyline rims (hotwire type)
when it arrives in the mail shortly i will be installing a very large cam and microtech ecu
and the head will be ported again even more than now
also bigger valves planned
once im bored of this (estimated time two months)
i have a 1g-gze supercharger to bolt on
and will order some forged pistons and conrods, hope to run boost at 20psi, should be ok, need very large injectors
rest of the stereo to be arriving into the car shortly includes 1000w amp, 2x 12 inch subs in custom boxes, 4way 280w pioneer speakers, 140w alpine two ways and tweeters in dash where factory speakers used to be
also hope to get a new steering wheel when i find one to suit
|
|
|
Location:
Newcastle
Registered:
May 2002
|
|
Re: Roll Call!
|
Tue, 25 June 2002 10:48
|
|
1980 RA40 Coupe (looks bette than those fugly liftbacks )
18R-GEU fully rebuilt with about 600 ks on it
extractors
ported head
2 inch stainless mandrel bent zorst with a straight through kerker muffler.
koni red adjustable rear shocks
some nolathane bushes
14 inch five spoke ROH mags..
planned mods.
new front tyres before the cruise.
supercharger in 6 months to a years time.
lowering
shock rebuilds
some rust repairs
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Tue, 25 June 2002 13:30
|
|
|
Dont forget the stickers!
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
 Re: Roll Call!
|
Tue, 25 June 2002 23:44
|
|
 ha ha . i did such a bodgy job of cutting them out, i thought i would not mention them! 
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 26 June 2002 03:33
|
|
YEAR/MAKE/MODEL
1971 TA22 celica 
ENGINE
1972 TA22 2T-B Single cam
ENGINE ACCESSORIES
Rebored Block
45mm Weber Carb
Redline performance Mainfold
Genie 4-1 2.5 inch Extractors
2.5 inch straight thru Ststem to Lukey sports muffler
Rampod Filter (soon to be K&N)
Polished + ported head
Larger valves
Hardened Valve springs + seats
Lightened Flywheel
Balanced Crank
High Compression dome-top pistons (forged i think)
Stock cam ( soon to be replaced with mild Crane item )
*Motor was a Ex drag racing motor capable of 11 second passes with now sold Billet competition cam + turbo*
DRIVELINE
Stock t50 5 speed + diff
SUSPENSION
Front:
Monroe GT gas Struts/stock springs
Kmac 24mm Swaybar/urethane bushes
Rear:
Monroe GT gas Shocks/stock springs
18mm Whiteline Swaybar/urethane bushes
BRAKES
Front:
DBA Slotted rotors/Stock calipers/premium
Rear:
Stock Drums - Rebuilt
BODYWORK
Stock Bodywork
Custom "unknown red" paintwork
ROLLING STOCK
14" x 7" Speedy Chrome steel rims
4 x 185/60 Tyres
STEREO COMPONENTS
Clarion Single Cd player
Clarion 6X9 parcel speakers
Phillips Splits in the doors
Other:
Car alarm/immobiliser
Remote Central locking
Factory Air Conditioning ( to go in)
Honda Prelude VTiR seats
SAAS steering wheel + gearknob
FUTURE MODS
15" Alloy Rims and Tyres
Lowered Springs/adjustable panhard rod
Mild cam
Thermo Fan Charge Switch
Rear Seat Retrim to match front seats
Tinted Windows
Paint Job (a known shade of red or metallic Blue)
custom console
Sub and Amp
Cold air indiction system to weber
Electronic ignition
Strut tower brace
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 26 June 2002 03:34
|
|
YEAR/MAKE/MODEL
1971 TA22 celica
ENGINE
1972 TA22 2T-B Single cam
ENGINE ACCESSORIES
Rebored Block
45mm Weber Carb
Redline performance Mainfold
Genie 4-1 2.5 inch Extractors
2.5 inch straight thru Ststem to Lukey sports muffler
Rampod Filter (soon to be K&N)
Polished + ported head
Larger valves
Hardened Valve springs + seats
Lightened Flywheel
Balanced Crank
High Compression dome-top pistons (forged i think)
Stock cam ( soon to be replaced with mild Crane item )
*Motor was a Ex drag racing motor capable of 11 second passes with now sold Billet competition cam + turbo*
DRIVELINE
Stock t50 5 speed + diff
SUSPENSION
Front:
Monroe GT gas Struts/stock springs
Kmac 24mm Swaybar/urethane bushes
Rear:
Monroe GT gas Shocks/stock springs
18mm Whiteline Swaybar/urethane bushes
BRAKES
Front:
DBA Slotted rotors/Stock calipers/premium
Rear:
Stock Drums - Rebuilt
BODYWORK
Stock Bodywork
Custom "unknown red" paintwork
ROLLING STOCK
14" x 7" Speedy Chrome steel rims
4 x 185/60 Tyres
STEREO COMPONENTS
Clarion Single Cd player
Clarion 6X9 parcel speakers
Phillips Splits in the doors
Other:
Car alarm/immobiliser
Remote Central locking
Factory Air Conditioning ( to go in)
Honda Prelude VTiR seats
SAAS steering wheel + gearknob
FUTURE MODS
15" Alloy Rims and Tyres
Lowered Springs/adjustable panhard rod
Mild cam
Thermo Fan Charge Switch
Rear Seat Retrim to match front seats
Tinted Windows
Paint Job (a known shade of red or metallic Blue)
custom console
Sub and Amp
Cold air indiction system to weber
Electronic ignition
Strut tower brace
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 26 June 2002 03:35
|
|
sorrty bout the double post - i had computer issues !
|
|
|
Location:
Gold Coast
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 26 June 2002 04:31
|
|
Classique71: Thought you had 2 of em... 
Nice car(s) by the sound of it...
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 26 June 2002 04:43
|
|
HA - a pidgeon pair -
Noo - no twin pigs for me
Its a pretty good old celica - looking forward to the upcoming CCCQ dyno day to see whata ll my go faster bits now can do
the motor used to do 185hp and a top rev figure of 9800rom when it was on the engine dyno - but i never saw the rear wheels figure ..
Im HOPING for around the 70 - 80 mark at the rears so i can then get the right cam profile installed ( stock cam atm ) to take Tinas Dyno Crown 
Buahaha - porn car boinked into submission by the pig !
( i call it a pig cause it snorts and grunts thanks to the weber )
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Thu, 27 June 2002 09:20
|
|
I guess I'll add my 2c worth.
1977 RA23 Celica coupe - the Orange Eyesore
- 18R-GU with GEU injection
- 2" lowered Fulcrum springs, Pedders shocks, urethane bushes all round
- 14x7" alloys
- MA61 Supra ventilated front discs and calipers
1984 MA61 Celica Supra - the Black Skid Car
- 6M-GE (3.0 litre DOHC inline 6)
- 5-speed
- urethane bushes in front suspension
- otherwise totally stock, but does good skids
1984 MA61 Celica Supra - the Super Sideways Supra
- 2JZ-GTE (3.0 litre DOHC twin turbo inline six)
- 4-speed auto, possibly 5-speed manual soon
- frigging huge custom intercooler
- Aristo front brakes (BIG) with twin-spot calipers
- planned future mods include lowered suspension, 16" rims and a respray
Full details of the above can be found on my web site.
|
|
|
Location:
Brisbane, Queensland
Registered:
May 2002
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Mon, 01 July 2002 14:11
|
|
|
Where have i seen "THE BITCH" mentioned before? On a webpage?
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: Roll Call!
|
Sat, 06 July 2002 07:33
|
|
Ok I am in Brisbane
Make
1984 Trueno Sprinter Coupe (White with black windows)
Specs
-4age engine with twin 45mm webers
-2inch exhaust
-15inch Nismo wheels with Dunlop fm901 rubber 195/50/15
-Lowered on KYB shox and King springs, all nolothane bushes, rear sway bar, camber and caster kit
-Group C rear wing and front lip
-Basic stereo (stereos are too heavy)
This car is my daily driver that also sees tarmac rally duty. If you were at ARC Noosa hillclimb stage on June 15 (I think) you will have sen my trueno fly up the mountain before the ARC cars came up.
NoPsi
|
|
|
Location:
gold coast
Registered:
July 2002
|
|
Re: Roll Call!
|
Mon, 08 July 2002 09:31
|
|
I am a new comer from the Gold Coast
I have a japanesse import
1996 Caldina Wagon (st195) i bought about two years ago
Its came with a 3sge auto and factory 4WD
since then i have done a GT4 engine conversion and done a few mods.
ENGINE
It now has a Garrett ball bearing GT30 450hp turbo,due to the old ct26 not handleing 23psi of boast(it destructed the exaust wheel) and a custom manifold and full stainless 2.5inch mandrel bent exaust made by HYTECH MUFFLERS on the coast
While the the turbo was off i put a new gasket kit through the motor and a new brass button clutch from Jim Berry Race Clutches (awesome)At the moment i have a subaru Liberty water to air intercooler, the computer is a Japanesse blitz access which has cut the speed and boost limiters. The fuel pump is a replacement bosch in tank rated at 500hp. The injectors are stock at the moment.
SUSPENTION
The front has RSR springs that come with the car and KYB adjustable shocks that come with the GT4 front cut, the rear has stock shocks at the moment and kins springs as the RSR weren't quite low enough.
BRAKES
gt4 front calipers and cross drilled discs with factory rear discs, pads of unknown origin(can not find any, any where)
WHEELS
BSA 214 chrome with falken 215/40/17
INTERIOR
ALPINE heaad unit with alpine splits in the front and a soundstream 12inch in the rear all running of a KENWOOD 4 channel amp. APEXI el series boost gauge, APEXI rev-speed meter, pivot turbo timer and a AUTOTECHNICA wheel and gear knob
EXTERIOR
It has a factory body kit plus a jap front skirt
I resrayed it in factory black and grey dueto a altercation with a caravan 
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Roll Call!
|
Mon, 08 July 2002 10:26
|
|
Aha!! the mighty wagon - doode i want that as my dog transport 
Still keen on getting a rough $$ amount for conversion as i still think its an awesome sleeper
BTW - is she auto still or a 5 spd emanuel?
|
|
|
Location:
Brisbane - Chapel Hill
Registered:
June 2002
|
 Re: Roll Call!
|
Wed, 10 July 2002 03:33
|
|
I just got my first Toyota! (first car even!)
YEAR/MAKE/MODEL
1976? RA23 Toyota Celica
ENGINE
None 
ENGINE ACCESSORIES
Fuel lines that will beed to be replaced anyway ...
DRIVELINE
Has a rear axle with no diff centre atm
SUSPENSION
Front:
Std RA23 Struts i think
Rear:
Std RA23 Rears
BRAKES
Front:
Std, to be replaced
Rear:
Std, to be replaced ... maybe with the original front calipers
BODYWORK
Crusty Yellow, which buffs up quite ok however But will get a bluejob sometime in its future i think No door or bonnet hinges atm tho :/
ROLLING STOCK
4 x 114, 14" x 6" Standard RA23 Celica Rims w/ 185/70R14 wrapping
Also got another 5 x 114 rims, 3 w/ 195/70R14 wrapping, and two rimless truck tyres!
INTERIOR
The fun continues ... old dash, two old seats, one is pretty ok, back seat etc ... some interior door panels, heater box etc ... all under dash is ok. Ceiling is in good order for a car its age i reckon. All glass.
STEREO COMPONENTS
Nil. Prolly will get an old P200 MP3 box with some old CDROMs
FUTURE MODS
Note: I dont need a car, so this one has no pressure to get on the road in any short timeframe. I'm planning on having it as least as a rolling shell again, for early next year in the case our tenancy isnt renewed.
Otherwise: I would like to make it a circuit car, with a few compromises to make it streetable. I aim to keep the car looking fairly stock on the outside. I am not at all interested in the interior tho, I think it will be rather spartan, except for the two front seats, and a big rollcage. I'm not so much used to comfort, so it dosent bother me too much.
Atm its all being stripped down and having the one major spot of rust looked at. Im looking into lighter composite materials for the bodywork, and some of the interior parts that need replacing. The external panels are all reasonable, with a few minor dents and surface anomolies. There was no front on the car however (front grill, bumper etc ... )
Suspension is going to get a major work over, and I will probably be straying from the toyota parts bin for the engine. Engine managment will hopefully tie in with my thesis.
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
|
Location:
North Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Sat, 03 August 2002 02:31
|
|
alrighty, here i go...
i drive:
1989 Toyota Supra Turbo
Targa Top
Black (the paint is turning on me...)
Auto (dammit)
everything is just about stock....
Stuff added...
R32 16" rims, 225 tyers of some description (getting bald on the back)
3" Cat back exhaust, 1 muffler (3" straight thru) no resonators..
DEH-P8250 Headunit (friggin great thing too)
stock 4" speakers all round...
mods
throttle body bypass mod
cut open air box
heater bypass (any one want to help me pull apart the dash so i can fix that friggin heater, drove to armidale over the holidays, damn, that was cold....)
shimmed wastegate
no BOV (it died)
stuff sitting around....
spare 7M-GTE head, needs welding
lots of hoses + crap removed...
half used front brake pads
MTX 12" 4000 series sub, needs box so it can fit in the boot(anyone want to help build one?)
MTX thunder 302 amp (useless without sub box)
Pheonix Gold 2x75 WRMS amp (i'm too lazy to install)
7x10 kenwood 3-ways (wont if in the supra AAARGHH)
god knows how much 4 guage cable i have lying around...
i want to spend a butt load and turn it into a race-track (but still streetable) beast, which i think is quite possible, although getting it to stop running rich and eating oil would be good right now....
that's about it....
i have access to a 85 charade, but nobody wants to hear about that i think....
c-ya,
|
|
|
Location:
GoldCoast/Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Tue, 06 August 2002 16:59
|
|
1st car "Daily Driver"
1998 Starlet 1.3 Life hehe..
Mods: Cat-back exhaust
16" rims, 205x40x16 tyres
Lowered approx 1.5 inch all round
Front and rear swaybars
Had a nice stereo up until 1 month ago.... and if I catch the motherfucker I will cut his fucking hands off with my machete! This car is basically a go-kart on steroids.....handles likes its on rails ....pitty it is slower to the hundred than most go karts too. LOL
2nd Car "Currently under construction"
1985 AE86 Toyota Sprinter Owned for 4 months.
So far Paint got done 2 weeks ago... keeping it old skool looking. Red on black.
Planned mods:
Either 20V or GZE "still undecided, insurance will be a big factor I think"
Some nice deep dished rims, no bigger than 16".. "most likely go with 15's
Lowered conservatively, uprated swaybars etc. Focus on handling, and no not for "Fully sik driftin'"!!
Interior will be redone with a focus on keeping me in the drivers seat while going around corners and not on top of my G/F in the passenger seat..... except at Red Lights hehe!!
Pete you have to take me for a drive in your starlet one day man!!
Cheers,
Adrian!
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: Roll Call!
|
Wed, 07 August 2002 05:27
|
|
Scott Gibson
white SA63 in bits at the moment but still sort of drivable.
white MA61 supra stock in good condition, am slowly restoring it to it's full glory mechanically etc..
Also slowly making up custom (bolt on) side skirts for these 2 models of toyotas in qld.
Will be at Jamboree, come and say hi if u see me and my celica
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 07 August 2002 07:24
|
|
Live in Brisbane
YEAR/MAKE/MODEL
1986 Toyota Supra
ENGINE
7mge (inline 6, non turbo)
ENGINE ACCESSORIES
extractors
3 inch exhaust with 4 inch tip (not sure of brand)
DRIVELINE
stocko 5 speed
SUSPENSION
Bilstein dampers and springs
BRAKES
stocko discs on all 4
BODYWORK
new mirror
ROLLING STOCK
17 inch Racing Harts with red anodised hexy cap. 235/45 Toyos on all 4
INTERIOR GADGETRY
maple leaf airfreshner
STEREO COMPONENTS
stocko double din tape deck and radio with stock speakers
FUTURE MODS
2jz or 1jz conversion
new stereo
|
|
|
I supported Toymods
Location:
yandina sunshine coast
Registered:
September 2002
|
|
Re: Roll Call!
|
Mon, 23 September 2002 01:20
|
|
Live on the sunshine coast
YEAR/MAKE/MODEL
1991 twin turbo GT-L SOARER
ENGINE
twin turbo intercooled straight six
1jz
ENGINE ACCESSORIES
4 " HKS Exhaust , hi flow muffler
HKS air box \
HKS Turbo Timer
DRIVELINE
4 spd auto
SUSPENSION
lowered bilsteins
BODYWORK
front and rear spoilers
ROLLING STOCK
16 " 225 50
INTERIOR GADGETRY
STEREO COMPONENTS
160 watt head unit
9 speakers
12 " sub
FUTURE MODS
gt 40 turbo
bigger intercooler
|
|
|
Location:
Ashmore, QLD
Registered:
September 2002
|
|
Re: Roll Call!
|
Thu, 26 September 2002 16:05
|
|
CAR: 1981 Corolla KE38 Wagon
ENGINE: Stock 4k-c, 1.2ltr
G/BOX: Stock 5-speed
STD: Air Cond.
MODS: 13x6 Cheviot Turbo mags, on 165x70/13 rubber... thats it.
FUTURE MODS: 18r-g engine replacement, celica 5 spd, and diff
15 or 16 in. wheels, repaint, custom interior
COMMENTS: Its a shitbox, but I own it and the banks don't!
|
|
|
Location:
Brisbane, QLD
Registered:
September 2002
|
|
Re: Roll Call!
|
Fri, 27 September 2002 06:06
|
|
|
[COLOR=orangered]hey everyone... im in yr 12 and my first car is a Datsun Sunny, dont laugh cant afford anything good yet... i have 3 choices in mind for a real first car... either an SR20 Datsun 1600, or a nice TA22 or maybe one day a RA28 with 1JZ-GTE, like Paul Mcmee from newcastle (saw at many Toyota nationals in dubbo)dont know how to spell his name but yer... have been a member of CCCQ since i was 4 i think lol, so ive grown up with very nice ceilicas if you have seen them, well keep everyone
|
|
|
Location:
Townsville NQ
Registered:
September 2002
|
|
Re: Roll Call!
|
Wed, 06 November 2002 11:17
|
|
KE55 COUPE
4k motor large port job
130" deck of the head
71/39 cam
40" oversize piston
twin 45mm su carbs
runs on methynol
paint is mengenta (pink/purple) with extra met and flake
car is unreg and runs in the burnout comps and soon the bitumen sprints
mods coming are super charge 18rgeu with injet comp
5 speed celica box shortened ford b/w lsd diff, hilux brakes up front, lowered king springs and huge sway bars, this car will be built to run the 1/4 in the 12 bracket.
other cars are
subaru brumby with a liberty 2.2l motor thia car has to many mods to list, the suspension is all custom dual shock to race in the NQ offroad champsionship, it has a full CAMS rollcage, this is my work ute
rambler matador 360 v8
demo derby car
wife car is a excel
and there's more but not today
|
|
|
Location:
Gold Coast
Registered:
October 2002
|
|
Re: Roll Call!
|
Fri, 08 November 2002 11:08
|
|
Toyota Celica RA23 1976
Sold my 86 celica and upgraded (downgraded lol) to this one.
Itas a one owner little old lady car so ot is in above average condition for its age.
Body
Sky blue metallic
body damage:
front left passanger fender (small impact)
largish dent in passanger door (about 1/2 fist sized)
5 total minor parking dints
Has had semi respray on front (bonnet fenders) shitty job i would slap whoever bogged/ preped the surface.
Rust:
Very small rust spots (20c sized) in left/right fender and suspected rust in rear windscreen where the visor thing was.
Underbody has been rustproffed from new and looks like a car thats only 5 years old, verysuprised.
Mechanicals:
Motor perfect the mighty 18r-c
suspension stock front left shocky suspected damaged.
we fitted new brake everything front and rear and it still stops like shit (compared what im used to lol)
new granny spec zorst
Interior:
Excellent condition for age only dash badly cracked.
I hope to work on the body and have a full respray by the time uni comes round next year. I would also love to put in the 18r g motor if money/ time allows
dont hesitate to come say hello if you see my car arround, I often go to broady on saturday nites too.
cheers
Daniel
|
|
|
Location:
brisbane northside
Registered:
November 2002
|
|
Re: Roll Call!
|
Mon, 11 November 2002 08:15
|
|
hmm k live in brizzy northside
i drive
84 celica xt with sa63 engine
mostly stock cept the wheels, mags flowery lookin stuff
and just got exhaust 2 inch with 3.5 inch tip
not much more then that... im pretty new on this car scene so i dont know too much specific stuff
ooohh yer and my engine head cracked
http://www.boostcruising.com mad site 4 any one in the brizzy area even if not on boost
|
|
|
Registered:
May 2002
|
|
Re: Roll Call!
|
Sat, 21 December 2002 05:22
|
|
Car Make/Model:
1990 ae92 Toyota corolla seca
Engine:
4AGZE
Engine Accessories:
Stock
Driveline:
4AGZE 'box, driveshafts etc
Brakes and Suspension:
Front: Ventilated Disc from the halfcut
Rear: SX discs
Bodywork:
Standard, resprayed in original red
Scoop for the interwarmer
Rolling Stock:
stock
Interior Gadgetry:
stock
Stereo:
stock
Future Mods:
King springs and monroe gt shocks
FMIC
Maybe a cd player
|
|
|
Location:
Brisbane
Registered:
January 2003
|
|
Re: Roll Call!
|
Tue, 21 January 2003 03:56
|
|
Mk3 GA70 Supra (White)
1JZGTE swapped in
4spd Auto
Turbos rebuilt with metal turbine wheels
Pod Filter
3" Mandrell bent exhust from turbos back with 3" straight through muffler
Lowered King Springs
Koni Shocks
Turbosmart Dual Stage Gated Boost Controller
Future Mods:
DBA Slotted Brake rotors
Apexi S-AFC II
Sard Fuel Pump
Sard 800cc Injectors
Garrett GT35 Turbo
Orange (or maybe a nice dark blue respray (White is gettin a bit old)
1JZGTE 5spd
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: Roll Call!
|
Sat, 25 January 2003 11:52
|
|
1988 Celica SX Hatch.
Mods:
# K&N Pod Filter (just sitting off the AFM unsealed for engine bay, not good).
# King Springs all round.
# Monroe Gas GT shocks on the front and Monroe Orginal's Gas (ment to be the same spec as the GT's it just the whole strut leg).
# Blaupunkt Casblanca CD-51 Head Unit
# Blaupunkt RC-10 Steering Wheel mount remote control.
# Ok sony 4in speakers in front (free from dad, he upgraded)
# Cheap arse Reactor (that the brand name) 6in coax 3 ways on a costum 10mm MDF hatch parcell shelf.
# Cheap arse Reactor box with their cheap 12in wooofers in hatch.
Everything else is stock  
Future Mods:
# 2.5in mandrel bent(probably only press bent, don't know which ones to get.) exhaust system all the way through, with extractors of some kind (hoping 4-2-1). 2.5in High Flow cat, Lukey glass pack muffler with twin exit tips, tips being 2.75in
# Bonnet scoop (need cold air)
# Upgrade the speakers, looking at JL spilts, JL 6in coax, and JL 12in subs on a unknown amp.
# Wheels of some kind (i have been looking, it not fun without money). Will be 17x7in. ROH: Adenalin's, Advanti Racing: Talco
# 4 piston claipers of some kind (supra or GTS-t skylines), to of them on each front wheel, with the biggest DBA Gold life rotars that fit under 17in rims.
#upgrade the rear braking system with extra caliper for the hydrolic hand brake upgrade (just based on motor bike setup).
# LSD diff
#Probably engine mods of some kind but maybe just a 4th gen 3S-GE (1999) model with dual VVT-i and 200hp.
That all i can plan for now.
Nezza 
|
|
|
Location:
Brisbane
Registered:
December 2002
|
|
Re: Roll Call!
|
Sun, 26 January 2003 03:39
|
|
Looks like im the first Camry then..
Location: Brisbane Qld
1988 Toyota Camry CS-X
Std equipment: 3sfe, 5sp Man, pwr steer, Air con, pwr antenna 
Mods: lowered springs, 16" alloy wheels, 205/55 series tyres, 2" sports exhaust, rear wing, side skirts, front air dam, tinted windows, cd player, upgraded speakers, engine keypad immobiliser, full alarm system, xenon ice blue headlight inserts 100/90w, blue parklight bulbs and interior bulb, rear louvre.
Future Mods: Camry ultima cruise control unit, and modified engine ..havent decided yet. 
|
|
|
Location:
Graceville, QLD
Registered:
January 2003
|
|
Re: Roll Call!
|
Thu, 30 January 2003 11:14
|
|
Well, i'm new here.
I own a corolla seca csx.
Pretty much unmodified (except for the exhaust), and i'll probably keep it that way. I wanna get an old celica and do work on that, but that wont be for a little while.
Oh, btw, I am the brother of Rhys Keepence who used to hang out in these forums.
Ryan
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Roll Call!
|
Fri, 31 January 2003 00:42
|
|
I'm very sorry to hear that.
|
|
|
Location:
Brisbane, Queensland
Registered:
May 2002
|
|
Re: Roll Call!
|
Sat, 01 February 2003 00:00
|
|
Hey Ryan
Where abouts in Gracevlle do you live?. And at what Domino's do you manage?. I'm around this area, you might have seen two TA22's getting around.
|
|
|
Location:
Graceville, QLD
Registered:
January 2003
|
|
Re: Roll Call!
|
Wed, 05 February 2003 06:56
|
|
I am just near the bp at graceville.
and I manage the Goodna dominos
|
|
|
Location:
Brisbane, Queensland
Registered:
May 2002
|
|
Re: Roll Call!
|
Wed, 05 February 2003 08:03
|
|
Goodna....fully sick ehh bro...lol cool man.
You live right near me. I'm around near Christ the King church.
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: Roll Call!
|
Sat, 08 February 2003 23:33
|
|
Ok seeing there no toyota utes listed in here
Model / Year
Hilux 2X4 / 95 model
Engine
22r currently undergoing carb to efi conversion.
Interior
Back wall and side carpeted - considering removing the passenger bench/bucket for a single bucket and making centre consol.
Sterio
Kenwood head unit
6 X 9 VDO speakers in the doors.
Sony 12 inch sub (got it into the single cab without cutting anything)
Kenwood Amp
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: Roll Call!
|
Fri, 28 February 2003 05:48
|
|
I have a 1990 Maroon ST185 GT-Four.
Mods
* 17x7" Viper A2 Alloys with Goodyear Eagle F1 215x40x17 tyres
* Intercooler Fan
* Mild Stereo
Future Mods
* ST205 Gearbox
* Aussie 3" dump pipe and hi flow cat
* ECU mod to allow full boost in 1st and 2nd gear
* Slight boost increase (10psi)
* Air intake upgrade
|
|
|
Location:
Coorparoo, Brisbane
Registered:
March 2003
|
|
Re: Roll Call!
|
Wed, 05 March 2003 09:33
|
|
being a new member, i figure what better place to show face for the first time then in here
Car:
2002 ZZ231R Celica
Mods to date:
17" Sportivo rims
Injen CAI
2.5" custom cat back system
King springs
Future mods:
All the Whiteline gear i can get my hands on
TRD LSD
Sportivo/TRD skirts/rear skirt/front bar (sitting in garage waiting to be painted/fitted)
Link:
http://www.agen.com.au/temp.jpg
|
|
|
Location:
bris
Registered:
February 2003
|
|
|
Location:
GoldCoast
Registered:
March 2003
|
|
Re: Roll Call!
|
Mon, 10 March 2003 01:32
|
|
new to the forum
toyota camry 1990
Location: gold coast
car is basically stock
engine:sv21, 5sp, pwr steerin, aircon broke.
mods: 2.5" exhaust system (makes for one loudass camry ), mags, cd player.
|
|
|
Location:
Brisbane
Registered:
March 2003
|
|
Re: Roll Call!
|
Tue, 25 March 2003 11:15
|
|
Hey all my name is Troy and I'm from Brisbane (Southside). I own an RA40 coupe with an 18R...
Modifications include;
Engine Mods:*Twin-throat 32/36 WEBERS,
*K&N air filter, extractors,
*2 1/2" sports exhaust -Redback muffler - 3" tip,
*Glass fuel filter,
*Heavy-Duty Clutch,
Body Mods: *New paintjob in Holden Cyan Metallic Blue,
*Shaved side indicators, now the parkers do the job of indicating,
*Shaved badges and aerial,
*Rolled and flared guards,
*Lowered 3 inches all around,
*14" Jellybeans with 195/60's.
Interior: *Full interior retrim in blue and white vinyl,
*Oil pressure and Voltmeter guages in place of factory clock and air vent,
*Assortment of neon lights in and under the car,
*Autotechnica black and blue steering wheel,
*Monza gearknob,
*Type R racing pedals...
Stereo: *JVC MP3 Head unit,
*2 sets of Hertz 6" splits running off 600W Paragon amp,
*MIK 12" dual voice coil competition sub running off a BOSS 1000W amp. Huge Interdyn RCA's.
Planned mods:*4AGZE blower or turbo...
|
|
|
Location:
Gold Coast
Registered:
May 2002
|
|
Re: Roll Call!
|
Sun, 28 September 2003 12:25
|
|
Burp!
Edited to show current toys...
|
|
|
Location:
brisbane
Registered:
August 2003
|
|
Re: Roll Call!
|
Mon, 29 September 2003 10:38
|
|
Car - RA40 Coupe
Engine - 18rg
twin 45 webbers
slight port and polish
extractors
2 1/4" exhaust
Driveline - W50 box and diff
Interior - Honda Civic Bucket seats
stock head deck
Suspension - 1 1/2" lowered King Springs
Monroe shocks
Tyres - 195/60/14 (soon to be 50)
|
|
|
Location:
Brisbane
Registered:
June 2003
|
|
Re: Roll Call!
|
Tue, 30 September 2003 08:17
|
|
Ok my turn!
I drive currently:
1991 Ford eb fairmont
3.9L straight 6
bone stock.
I have being constructed atm
1983 Ma61 Supra with :
- 302 ford motor (4.9L)
- Custom headers, twin 2.5" to one 3" exhaust.
- Oil cooler
- 750 holley 4 bbl with vac seccs.
- other internal mods.
- w58 supra 5spd, with CRS bellhousing, ford HD clutch etc.
- F313 lsd...hunting a 3.7 ratio to replace the 3.9
- soon koni shocks and king springs.
Hopefully running on xmas 2003.
I am also currently looking for an ma70 supra.
|
|
|
Location:
Brisbane
Registered:
October 2003
|
|
Re: Roll Call!
|
Wed, 01 October 2003 14:06
|
|
VEHICLE
1983 ae86 sprinter
ENGINE/MODS
1990 S13 silvia ca18det
s13 turbo box
HKS turbo of unknown origin (pretty sure is a fj20 t3 base)
Apexi hybrid intercooler
Microtech lt-8 with 4-line handset
DRIVELINE
R31 lsd
s13 turbo 5sp
lightened mark barnes flywheel
SUSPENSION & ROLLING STOCK
15x6.5 speed star rims
13x6.5 dd chromies (thrash/drift rims)
205x45x15 nankangs
18lbs lowered springs (front)
the 86 is a project that should be running mid next year (04), still need my lift pump, surge tank, fuel pump, etc. decent suspension, clutch, radiator, lots'a'stuff.
i had only veiwed the car at night before i purchased it, brought it home to find heaps of rust, so i have been busy cutting out, welding up, and fibreglassing nearly every panel. paint is very bad atm, due to the rust repair, it shouldn't cost more than 15k to get it up and running nicely.
daniel
[Updated on: Sat, 06 December 2003 15:30]
|
|
|
Banned user
Location:
ADELAIDE - The Drift City
Registered:
July 2002
|
|
Re: Roll Call!
|
Fri, 03 October 2003 12:14
|
|
YEAR/MAKE/MODEL
1983 Toyota Sprinter
ENGINE
1992 AE92 100kw Red Top Non-TVIS 4AGE
ENGINE ACCESSORIES
4-2-1 extractors
2" Straight Thru Exhaust and Muffler with 3" Tip
K&N Pod Filter with custom cold air box
External VL (Bosch) Fuel Pump
No Air Conditioning Compressor
No Power Steering Pump
AE86 86KW ECU
DRIVELINE
T-50 gearbox in excellent cond
Heavy Duty clutch
T series rear end with TRD 2 way LSD
Redline 85W140 Diff oil
SUSPENSION
Front:
Cusco 8kg/mm Spring
RA 40 strut, modified to short stroke, shortened 70mm, Celica St185 GT4 shock fitted. Coilover sleve,
Cusco adjustable pillowball camber tops
40mm Roll Center Adjusters
RA65 Control arms
Rear:
Cusco 5.7 kg/mm springs, 240mm free height
KYB Short stroke shock
BRAKES
Front:
MA61 supra Disk and calipers
EBC Green Stuff Pads
Rear:
T series Drums
BODYWORK
Hatch completely striped, Custom alum door trims, entire car resprayed toyota white, gaurds rolled, grill painted black, as awere the mirrors, whipers and so forth. Custom bonnet graphic from previous owner.
ROLLING STOCK
where do i start....
2X Buddy Club P1 Racing Rims, 15X7
2X SSR Mark 1 rims, 15X7
2X 13X8's and 13X7's
4X 14X7 SSR mark one look alikes
INTERIOR GADGETRY
3 stage shift light haha
STEREO COMPONENTS
what stereo
FUTURE MODS
Adjustable lower control arms with Rod ends
Adjustable panhand rod
Adjustable 4 link rear end with rod ends
some high quality shocks front and rear, something along the lines of Tokico HTS's
respray front bonnet white, and bumpers black.
TRD D1 Wing
Koukie front splitter
S13 disk and calipers to go on the rear diff housing.
|
|
|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Re: Roll Call!
|
Mon, 06 October 2003 04:20
|
|
Chris Davey
Sunshine Coast
1982 Toyota Corona
engine:
jzx90 1jz-gte with auto
3" mandrel exhaust
bosch 600hp fuel pump
diff:
some mitsu 4WD import diff?
brakes:
HQ holden front
Mitsu import brakes rear
body:
respray canary yellow
flared gaurd front and rear
wheels:
front HQ
rear black 6 studs
interior:
fully stripped
SAAS seats
chaser dash
battery in boot
suspension:
shocks?
low king springs
future:
ECU
440cc injectors
t67 or GT35?
better FMIC
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: Roll Call!
|
Mon, 06 October 2003 13:55
|
|
Charles
RA40 hatch (1981)
rebuilt/balanced 18RC (now 7.4:1 comp)
T04 turbo
5sp
std brakes
Saas seats
red low-bake enamel
hand-reco'd interior
(except the roof liner as there's no way i'm taking it out)
Kenwood rad/cass 4ch amp & speakers
to be done:
a power dyno run before chucking the carbi (perhaps)
A/C (as i'm goddam sick of the brisbane heat) - nearly there!
EFI (megasquirt) & mod'ed manifold - nearly ready!
bosch fuel pump - got it!
FMIC - got it, needs repair ;(
better brakes
16" or 17" rims with suitable rubber
a radio/cd that plays CDR+W mp3's
work out how to lower the seats?
Charles.
|
|
|
Location:
Brisbane
Registered:
May 2003
|
|
Re: Roll Call!
|
Tue, 07 October 2003 05:11
|
|
Brisbane, Wynnum-Manly area. Though i'll move soon and possibly end up on the northside.
1990 Corolla Seca SX (white)
Engine:
Factory 100kw (red)
Factory box
Factory clutch
Factory manifold, exhaust
NGK Iridium plugs
Shell Helix Ultra Baz
K&N panel
70mm PVC CAI
Suspension:
Low King springs
KYB Front dampers
Pedders Rear dampers
Brakes:
Factory
Body:
Coathanger aerial
Wheels:
Factory, but maybe not for long, we'll see
Interior:
Sheepskin
Stereo:
Who cares
Todo:
short shift
|
|
|
I supported Toymods
Location:
Sunshine Coast
Registered:
March 2004
|
 Re: Roll Call!
|
Tue, 16 March 2004 13:37
|
|
ok this is an old forum but anyways
im loacted on the sunshine coast and i own a silver 86 celica sx
pioneer deh-1650 head unit,pioneer front 4 inches and 1 1/2 inch tweeters,2 12 inch pioneer subs and 4 inch 2 way audioline(woo hoo i got them for free) they go ok i guess
new leathure boot and silver sprayed dash on some parts
custom rear parcel tray
halogen driving lights
2 chrome exuast tips(small)
this car is pretty much stock except for sound system that goes hard
im only on my L's so engine mods havent been done yet but when i get my P's BAMM
lata
|
|
|
here is me.