| Author | Topic |
|---|
Location:
Tas, Australia
Registered:
March 2003
|
|
Garrett T28 from sr20
|
Tue, 01 July 2003 11:31
|
 |
hey guys,
Anyone know where i can pick up a Garrett Non-rolla bearing T28 from???? ...Donor Car is Black-Top 1995-'98 Silvia !!
2ND-hand would b great!
Cheers
Brian
|
|
|
Registered:
November 2002
|
|
Re: Garrett T28 from sr20
|
Tue, 01 July 2003 23:18
|
|
I have a T28 that was bought brand new and put on a GSR.
It has about 20,000km on it.
|
|
|
Location:
Tas, Australia
Registered:
March 2003
|
|
Re: Garrett T28 from sr20
|
Wed, 02 July 2003 03:26
|
|
gday Hypo!
do you know what the turbo is off?? what size etc.
it must fit a t25 flange. .. any pics?
thanks 4 your help!
cheers
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: Garrett T28 from sr20
|
Wed, 02 July 2003 08:30
|
|
T25 and T28 run the same exhaust flange, just different comp and exh A/R's either will interchange and bolt up, they do however use different inlet pipe fittings into the turbo.
Clint!
|
|
|
Location:
Eastern Sydney
Registered:
May 2002
|
|
Re: Garrett T28 from sr20
|
Wed, 02 July 2003 10:40
|
|
I could likely line you up with a std S14 or S15 turbo. how much are you prepared to spend for one?
I'm a member of the NSCC,and can put it around at the dyno day this weekend that I know someone who is after a stocker turbo if you like... one of the guys considering an upgrade may do it a little sooner if he knows he has a buyer for his std unit.
pm or email me directly,and we'll discuss it.
Justin...
|
|
|
Registered:
November 2002
|
|
Re: Garrett T28 from sr20
|
Thu, 03 July 2003 06:01
|
|
It was a brand new turbo. When I ran the numbers it showed up as a s14 model turbo.
It has a adapter plate to fit the GSR manifold so I am guessing it still has the standard flange.
| Ae86-Te wrote on Wed, 02 July 2003 13:26 |
gday Hypo!
do you know what the turbo is off?? what size etc.
it must fit a t25 flange. .. any pics?
thanks 4 your help!
cheers
|
|
|
|
