Author | Topic |
Location: Terrigal
Registered: May 2002
|
Tie rod crown nuts - how tight?
|
Mon, 04 August 2003 12:08
|
|
Hello, i've just replaced the inner and outer tie rods on my RA28.
All back together now, but need to do up the crown nuts. In the past i've just done them up and put the pin through but this time I checked in the Toyota manual and it says to do them to 50 foot/pounds.
I tried this on one of them, and it seems very tight! Does anyone think this is too tight for them or does 50 sound about right?
Its the ball joints on the tie rods where they go into the drag link and steering knuckle im refering to also..
Many thanks!
Joel
|
|
|