| Author | Topic |
|---|
Location:
adelaide
Registered:
August 2005
|
|
2tg/3t hybrid
|
Wed, 30 November 2005 07:04
|
 |
what is needed to be done to successfully build a 3t/2tg hybrid
i have comlete 3t and should be getting complete 2tg...
i have been told that i need to retard the exhaust cam and want to know if there is anything else that needs to be done for it to run properly
and is it possible to run the stock 3t carby on the 2tg head
any help is much appreciated
cheers
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
|
Location:
adelaide
Registered:
August 2005
|
|
Re: 2tg/3t hybrid
|
Wed, 30 November 2005 07:49
|
|
|
didnt find what i am asking
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 2tg/3t hybrid
|
Wed, 30 November 2005 08:00
|
|
|
Try harder. Its all there.
|
|
|
Location:
adelaide
Registered:
August 2005
|
|
Re: 2tg/3t hybrid
|
Wed, 30 November 2005 08:54
|
|
|
found lots of info on what upgraded pistons, to run etc... but nothing about the actual nitty gritty of what has to be done to put a stock one together
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2tg/3t hybrid
|
Wed, 30 November 2005 10:27
|
|
take the pistons and crank out of the 3T.
Get one of your 2t pistons, and take that, and all four of your 3t pistons to a machine shop. Get them to machine the valve reliefs of the 3t pistons THE SAME as the 2t ones for valve clearance.
Bolt the 3t pistons and crank into the 2t block, bolt your 2tg head on top of that.
If you want the nitty gritty, send me a pm, i will help you as much as i can. Just that the forum has been clogged with HEAPS of 2t/3t procedure stuff. Im not an expert, but i can point you in the right direction at least coz ive done the modification myself. Btw, use the search function, and write down everything that could be helpful, read as many posts as you can, youll find it all falls in place 
Good luck dude.
|
|
|
Location:
adelaide
Registered:
August 2005
|
|
Re: 2tg/3t hybrid
|
Thu, 01 December 2005 11:12
|
|
thank you for the info
i will pm you if i have problems when i build
cheers
|
|
|
