Author | Topic |
Location: Gympie
Registered: June 2005
|
Pix of 1jz Hoses??
|
Fri, 15 July 2005 00:37
|
|
Hi guys.
I've done a bit of searching and haven't found what I'm looking for, so I'll just ask. I need to know where some of the hoses on the intake side of the 1jz go to. One or two of them are missing/cut, and I'd really love to see some pix if possible. Ideally from about the back to the middle of the motor on the intake side, about halfway up the block. We have most of the pipes/wiring sorted, just have a couple of holdouts and we'd prefer to do them on the ground before (imminent) lifting motor in. Motor is JZX90 Chaser Auto, going into MX83 Cressida Grande. I gather that I may also need to swap ABS sensors from the back of the original auto into the Chaser auto. Is this the right approach? If so, is the sensor wheel inside the extension housing, or outside. Workshop is 200mt away so I am working from memory here, can't recall seeing it on outside of box.
Thanks for any help you can provide, including links to existing posts I've been unable to find.
Cheers Richard
|
|
|