F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » oil cooler on a 20V Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
bluehachi Regular Registered: September 2005	oil cooler on a 20V Mon, 05 September 2005 08:38 what sandwich plate do i use to fit an oil cooler on a 20V? where from and how much? also theres a bolt in the block above the oil press sender unit on the exhaust side on the 20V, is this tapped into the oil system, i figure it is due to its location next to the pump and oil press sender. If it is can i remove the bolt and fit a fitting and use this as my oil feed for turbo? cheers [Report message to a moderator]

	Subject	Poster	Date
	oil cooler on a 20V	bluehachi	Mon, 05 September 2005 08:38
	Re: oil cooler on a 20V	Matt-AE86	Mon, 05 September 2005 12:18
	Re: oil cooler on a 20V	bluehachi	Mon, 05 September 2005 12:23
	Re: oil cooler on a 20V	domasik	Tue, 06 September 2005 01:19
	Re: oil cooler on a 20V	bluehachi	Tue, 06 September 2005 07:40
	Re: oil cooler on a 20V	bluehachi	Tue, 06 September 2005 07:44
	Re: oil cooler on a 20V	4a-c	Tue, 06 September 2005 10:22
	Re: oil cooler on a 20V	hairywally	Wed, 07 September 2005 02:26
	Re: oil cooler on a 20V	Skaney	Wed, 07 September 2005 07:12
	Re: oil cooler on a 20V	Flogbag	Wed, 07 September 2005 10:17
	Re: oil cooler on a 20V	bluehachi	Thu, 03 November 2005 07:37

Previous Topic:	SusPension OIL VS GAS
Next Topic:	Difference in'S" type & 'T' diff's in sprinters?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.