| Author | Topic |
|---|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Wiring Diagram 1g-gte
|
Thu, 27 March 2003 10:23
|
 |
|
I desperately need the wiring diagram and the directions as to how to wire the 1g alternator into the ra23 loom. Can ANYBODY help me out with this one please!~
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: Wiring Diagram 1g-gte
|
Thu, 27 March 2003 10:46
|
|
its not too hard
plug on back of alternator has 3 pins
the black/yellow goes to ignition
the yellow goes to alternator light in dash
the white goes to battery
the thick white goes to battery preferably thru 100 amp fusable link
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: Wiring Diagram 1g-gte
|
Thu, 27 March 2003 11:13
|
|
Thankyou, that does assist, however I need just a little more specific information.
"the black/yellow goes to ignition " When you say Ignition, you mean the ignition wire that goes live when the ignition is turned on, correct?
"the white goes to battery " When you say goes to battery, goes to which part of the battery, connects to the positive terminal, or the negative terminal?
That bit at the back is the voltage regulator, right?
Or do I still need to run the standard ra23 voltage reg?
|
|
|
Location:
sydney
Registered:
March 2003
|
|
|
Location:
Arthurs Creek, Victoria
Registered:
May 2002
|
|
Re: Wiring Diagram 1g-gte
|
Fri, 28 March 2003 09:44
|
|
thanks heaps dude, but you need to be a little more specific. You say it goes to ignition when you get reds? what you mean get reds, get red lights on turning the ignition on?
and you say that the thin white wire goes to the battery positive terminal?
Now for external regulator, how do I know if the 1g alternator has an external regulator?
|
|
|
Location:
sydney
Registered:
March 2003
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
|
