| Author | Topic |
|---|
Registered:
June 2002
|
|
1jzge NA camshafts into a 1jzgte engine question
|
Fri, 09 May 2003 05:02
|
 |
|
Hi-I have read multiple times about NA 1jz cams being a good cheap upgrade for the 1jzgte engine. I picked up a set the other day and comparing them to the turbo cams, noticed a few differences and wonder if anyone here had tried this. The first thing I noticed was the NA cam only has one tooth for only one of the cam sensors, and the gte has two, and has two cam position sensors, both on the same cam(intake) Is this a problem? Are both cams to be swapped, or only 1? The other thing I noticed was the part of the cam where the cam seal goes is a bit larger than the GTE cam, and a different seal will be needed, possibly a 2jz cam seal? Lastly was the NA cams had a drive gear for the distributer, but it doesn't interfere with anything so I don't expect any problems. If anyone can help, I'd really appreciate it. Thanks-
|
|
|
