Author | Topic |
Location: Adelaide
Registered: April 2003
|
2T-GEU for sale
|
Sun, 18 May 2003 13:40
|
|
My car got stolen and written off so I am selling the engine
It is a 2T-GEU that is the one with factory EFI using the 3T block. I have already done the 3T crank conversion.
The engine needs to have the head recond it has been done before but has done a fair bit of work since then. It has a mild port job done on it and it got new exhaust valves but don't know what condition they are in.
The crank was reground when I did the conversion and when I had it apart a few weeks ago pulled the big ends off and their is bugger all wear in them the big end bearings are 50 thou oversize and the mains are 10 thou oversize.
The pistons are standard 3T pistons but the need to be chucked and replaced because it has a piston rattle when you first start it up. When they stole it they thrashed the crap out of it and now is not running on all four so don't know what other damage has been done.
Best offer will be taken all will be considered
EFI manifold and Extractors to go with engine but keeping the Haltech and wiring
Email if you want a chris108@optusnet.com.au
|
|
|