| Author | Topic |
|---|
Location:
Lost in the K hole
Registered:
May 2002
|
 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Sun, 15 June 2003 09:59
|
 |
Im going to be getting a 7M exhaust manifold flange laser cut out of 12mm steel sometime in the next 2 months. As ar as im aware, the place that wil be doing it works to 'minimum job cost', not piece work, so ill probably be able to get a few done for the same price as one.
anyone keen on getting one?
if anyone shows any interest, ill go and find out more specific details, and get actual costing. just for now i wanted to gauge the level of response 
fwiw: i doubt each plate would end up costing over $30-40, but thats just based on what ive been told from a third party, not the workshop itself
cheers
ed
|
|
|
Location:
Mildura
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 09:32
|
|
Ed
I'll ge you a price on getting one done.
About a box I rekon.
Not laser cut, but done with a profile cutter.
I was about to get one done anyway.
Marty
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 09:45
|
|
Marty.
thanks, that'd be awesome
Im definitely after one, so if you get something done, definitely count me in for one
a box?
box of beer?
box of unmarked bills?
box of white powder in little baggy's?
cheers
ed
|
|
|
Location:
North Sydney
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 10:05
|
|
I was going down that track a while ago until I got the HKS manifold but I think Liverpool exhausts has them on the shelf or can get them quite easily for relatively cheap.
Definitly worth a try
|
|
|
Location:
Mildura
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 10:09
|
|
Beer.
I'll try and get the boys to do it this week.(may take a week or 2 though)
I think I have an old exhaust gasket.
I have your address still so I'll just send it.
Marty
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 10:10
|
|
my local exhaust shop said the same thing - but then quoted me $90-110...
"screw that" i said, and went and asked my engineer
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 10:11
|
|
Marty, you rock 
cheers
ed
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 11:03
|
|
I'm after a flange for a 3S 
|
|
|
Location:
Brisbane
Registered:
October 2002
|
|
Re: 7M Ex-Manifold Flange (12mm) : Exp of Interest ??
|
Mon, 16 June 2003 12:21
|
|
I had my flange (7M) laser cut when we made the extractors for the boat. I had them put the program on disk for future use, and could get another copied easy. I just can't remember what it cost to get done (was 3 years ago). I can check on Friday if you want.
Dave
|
|
|
