| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
 Changing IRS diff
|
Sat, 05 July 2003 14:08
|
 |
Hey guys,
I'm on holidays now, so its FINALLY time I get to play with the car. I'm pulling the 1GEU and W57 out in the next few days (finally!  ), but I'm also removing the T312 diff to be replaced with the F303 (yeah, I know, its a 3.73, but I own it  ).
What I was thinking about trying to do is just swapping out the entire centre and axles, and see if the F-series gear just bolts into its place. I'm going to try and use the original driveshaft...for some reason, the parts car has a one-piece driveshaft!? Fingers crossed it's the same length.
My current rear end is a T-series with discs, which is as far as I can tell exactly the same as any other Mk2 Supra, save for the centre itself. I was hoping the bolt-holes are all the same or at least there, but unused.
Is there anything in particular you guys reckon I should do in changing this, or is my plan worthy of giving a go? Any suggestions are welcome! I've learnt a lot in theory through asking questions on these forums...and now I have to put it into practice!
Thanks,
Nathan
|
|
|
