F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » N/A exhaust diameter and decreasing diameters vs flow. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
BlackSupra Forums Junkie Registered: August 2002	N/A exhaust diameter and decreasing diameters vs flow. Thu, 14 August 2003 08:30 I was just wondering if there is any benefit in using an exhaust system diameter that gradually gets smaller as it moves towards the tip. Theory being that the gas cools as it moves along and thus creates less velocity towards the end of the system than at the start when it was really warm, requiring a larger diameter to move the expanded gas. I was thinking extractors-> 3inch -> 2.75inch -> 2.5inch Just a thought, any ideas? [Report message to a moderator]

	Subject	Poster	Date
	N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 08:30
	Re: N/A exhaust diameter and decreasing diameters vs flow.	boudan	Thu, 14 August 2003 09:43
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 10:03
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Thu, 14 August 2003 10:18
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 10:22
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Thu, 14 August 2003 10:35
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 11:09
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Thu, 14 August 2003 14:21
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Thu, 14 August 2003 14:22
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Fri, 15 August 2003 01:51
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Sun, 17 August 2003 14:21
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Mon, 18 August 2003 02:47
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Mon, 18 August 2003 03:38
	Re: N/A exhaust diameter and decreasing diameters vs flow.	boudan	Thu, 14 August 2003 10:06
	Re: N/A exhaust diameter and decreasing diameters vs flow.	draven	Thu, 14 August 2003 10:08
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 10:14
	Re: N/A exhaust diameter and decreasing diameters vs flow.	draven	Thu, 14 August 2003 11:39
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 11:50
	Re: N/A exhaust diameter and decreasing diameters vs flow.	draven	Thu, 14 August 2003 12:28
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Thu, 14 August 2003 12:30
	Re: N/A exhaust diameter and decreasing diameters vs flow.	7M-Brisbane	Fri, 15 August 2003 13:21
	Re: N/A exhaust diameter and decreasing diameters vs flow.	ed_ma61	Mon, 18 August 2003 14:22
	Re: N/A exhaust diameter and decreasing diameters vs flow.	gmsta27	Mon, 18 August 2003 18:27
	Re: N/A exhaust diameter and decreasing diameters vs flow.	oldcorollas	Tue, 19 August 2003 02:06
	Re: N/A exhaust diameter and decreasing diameters vs flow.	BlackSupra	Tue, 19 August 2003 08:34
	Re: N/A exhaust diameter and decreasing diameters vs flow.	ed_ma61	Tue, 19 August 2003 11:13

Previous Topic:	7MGE bore spacing and overbore limit
Next Topic:	TA22 Indicators and 2TG Tensioner

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.