| Author | Topic |
|---|
Location:
Melbourne
Registered:
October 2003
|
|
2tg/3tg rebuild torque specs
|
Wed, 15 October 2003 13:46
|
 |
Very new to toyota's (my first post) But anyway my g/f got a TA22 celica which i put a 2tg and manual box in, then i cooked the head so decided to rebuild it as the bottom end was showing it's age..
I got a crank from a 3t since the old crank needed a regrind anyway so nothing to lose, and the 2t-g was a bit low on bottom end toque.
What i'm after is the toque specs to put it back together. For now just the specs for bottom end will keep me busy (ie main caps, rod bolts, etc) But if someones's got them all then even better.
Is there anything special to the "G" series motor to pay attention to when reassembling?
Could i use a normal T motor manual as a guide? (i'd like to avoid paying $30 to get one if i could)
I was going to use the factoty 3t or 2t specs but heard that the
2t-g series motors are different?
I've got the right pistons to clear the G head with the 1.8 crank so that's not an issue. Plus the crank did fit in the block ok, suggesting that it was a GEU motor? (has carbs though)
I've rebuilt a coupla motors before but they involved pushrods.
Any help/advice apreciated. Thanks.
|
|
|
