| Author | Topic |
|---|
Registered:
July 2002
|
|
Sera (Paseo?) Automatic to Manual Transmission Conversion
|
Fri, 21 November 2003 03:10
|
 |
|
anyone have any info? Is it do-able?
|
|
|
Location:
Perth
Registered:
September 2002
|
|
Re: Sera (Paseo?) Automatic to Manual Transmission Conversion
|
Fri, 21 November 2003 03:32
|
|
What model is the car?
What motor/gbox combo does it have?
This way people can tell you whether you can use the gbox and pedals from a similar Toyota.
|
|
|
Registered:
July 2002
|
|
Re: Sera (Paseo?) Automatic to Manual Transmission Conversion
|
Fri, 21 November 2003 03:41
|
|
|
Sera is the gullwing car I'm sure those that knows should know, and it probably uses the same drivetrain as EP82/92? And same drivetrain as the Paseo, but I can't any info on the net, I'm sure someone here should know
|
|
|
Location:
Perth
Registered:
September 2002
|
|
Re: Sera (Paseo?) Automatic to Manual Transmission Conversion
|
Fri, 21 November 2003 03:48
|
|
Next time can get to the car, pop the bonnet and write down what is written on the Identification Plate
Mainly, body code, engine code, transaxel/diff codes
But it sounds like you run a 4E-FE or 5E-FE motor
I *think* this is the same as a Starlet, so you should be able to use a manual transmission from one of those. Pedals however, could be a different question
|
|
|
Registered:
July 2002
|
|
Re: Sera (Paseo?) Automatic to Manual Transmission Conversion
|
Fri, 21 November 2003 05:55
|
|
|
basically what is needed is the gearbox, master + slave clutch cylinder, pedal box, bolt to the firewall etc, same for any car, the engine is 5e-fhe, in my mind, I'm thinking a front cut of a turbo starlet including the gearbox, straight in, but I want to know if anyone's done it, I have an idea what needs to be done, but again, I want to know if anyone's done it, so I know how much it can cost...
|
|
|
