| Author | Topic |
|---|
Location:
sydney
Registered:
April 2003
|
|
where does the CT26 get it's oil and water from? Also supra fuel pump question.
|
Sat, 29 November 2003 11:37
|
 |
i'm doing a turbo converison on my 3s-fe, using a ct26, and am wondering where to get the oil from? i'm guessing from the oil sensor port, but any ideas on how to do this? i have the oil supply hard line and it has a banjo fitting on the end, does this meet up with the port? also for the water cooling, what lines should i splice into for this? and i dont have the fittings on the turbo to take the lines, just holes either side with screws to be able to mount something (also a blocking off plate for one of them), what should i do, go to toyota spare parts to get them? also on the oil return hard line, how is it connected to the sump?
as for the supra fuel pump, i thought another person that had done this conversion had used the jza80 TT supra fuel pump, then they said it was a "94-98 supra TT walbro 255lph fuel pump", so its not a stock pump? also he said "at 7psi you'll be running around 110psi of fuel pressure". i've got SUPRAMAN sourcing a stock TT supra fuel pump, would it do for these figures above?
sorry for my hard to understand post and ignorance, i'm very tired.
|
|
|
