Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » General Car Talk » ta22/2tg

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
The Untouchable
Forums Junkie


Location:
Ballarat
Registered:
September 2003
ta22/2tg Mon, 08 December 2003 05:29 Go to previous message
hey guys,
well i took the motor apart yesterday so ill tell you my findings. checked the bearings, there is a little bit of wear on them, but they are ok, im going to replace the front end bearings and main bearings, im grant btw, the one who owns the ta22 with the 2tg in it. k, so it wasnt the bearings that had siezed it. noticed a crack on the front aluminium cover, so took the rocket cover off etc. turns out the timing chain had come a bit loose and grated on the cover, cracking it. that meant the timing was way out, assuming the chain had slipped a couple of teeth. so the pistons had just touched the valves. checked them both, the valves are fine, tiny little bit of wear on the top of the pistons but they are good. no damage to the block (y) so, i guess all i need to do is replace the head gaskets, bearings, main bearings...um, anything else? i think ive forgotten to write something. tell me what you think of my analysis of it all anyway guys.
so i dont need to do the 3t piston conversion afterall, even tho i am a tad dissapointed i cant condone doing it. i might do it later..does it give enough performance to warrant doing it later?
also, im thinking, when ive got my motor apart now, i might get my head port and polished, is that worthwhile for a ta22? What type of performance gain and how much is a reasonable asking price 4 it done? anything i should ask for or keep in mind when getting it done?
also when the motor is apart im thinking of changing the cams. what type of cams would give the best performance upgrade most suitable for the 2tg motor? if you could give me specific brands/specifications of cams that would be great.
ive heard you can get the cams ground down, what are the pros/cons of this?
are sporty cams roadworthy? coz i wanna keep it roadworthy Smile

thanks heaps boys, answer any or all of the questions if u can
thanks!
  Send a private message to this user    

SubjectPosterDate
Read Message   ta22/2tg  The UntouchableMon, 08 December 2003 05:29
Read Message   Re: ta22/2tg bmanMon, 08 December 2003 20:11
Read Message   Re: ta22/2tg T APLUS 22Thu, 11 December 2003 07:07
Read Message   Re: ta22/2tg bmanThu, 11 December 2003 09:30
Read Message   Re: ta22/2tg bmanFri, 12 December 2003 03:44
Read Message   Re: ta22/2tg Evil_FoetusTue, 09 December 2003 06:54
Read Message   Re: ta22/2tg Evil_FoetusTue, 09 December 2003 07:30
Read Message   Re: ta22/2tg T APLUS 22Thu, 11 December 2003 21:47
Previous Topic:License Renewal plan
Next Topic:ouch

Goto Forum:
-=] Back to Top [=-

Current Time: Mon Jul 28 02:03:03 UTC 2025

Total time taken to generate the page: 0.00577712059021 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.