F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » ITB plenums Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Jayem Forums Junkie Location: Finland Registered: November 2002	ITB plenums Tue, 30 December 2003 18:37 I'm making ITB's for 3T and I have few questions that occupys my mind. 1. What is ideal plenum volume for charged/atmo?* 2. Where to take vacuum to brake booster?** *I'm going to make bell-mouths and try to run them with plenum and cold air intake for awhile. Until I'm ready to turbo-charge my engine. I'm thinking triangle type plenum to get even flow but trying several type plenums is no problem. I think that this is poor plenum considering even flow between cylinders. **I have made "balance pipe/box" that connects the four runners and this is the easiest point to take vacuum line to brake booster but this is where I'm taking MAP vacuum already. Does brake booster mess MAP sensor if they are too close? I'm taking this ITB project as a practical semi-scientific research to amass my experience . So dont entirely knock out my ideas. Pictures wanted!!!!! [Report message to a moderator]

	Subject	Poster	Date
	ITB plenums	Jayem	Tue, 30 December 2003 18:37
	Re: ITB plenums	Jayem	Tue, 30 December 2003 18:38
	Re: ITB plenums	Grega	Tue, 30 December 2003 20:51
	Re: ITB plenums	gianttomato	Tue, 30 December 2003 22:09
	Re: ITB plenums	Norbie	Wed, 31 December 2003 01:29
	Re: ITB plenums	gianttomato	Wed, 31 December 2003 04:01
	Re: ITB plenums	Jayem	Wed, 31 December 2003 11:29
	Re: ITB plenums	ed_ma61	Wed, 31 December 2003 13:18
	Re: ITB plenums	Jayem	Wed, 31 December 2003 16:23
	Re: ITB plenums	CelicaRA45	Thu, 01 January 2004 00:40
	Re: ITB plenums	Norbie	Thu, 01 January 2004 05:04
	Re: ITB plenums	gianttomato	Thu, 01 January 2004 07:06
	Re: ITB plenums	M.W.P.	Thu, 01 January 2004 07:47
	Re: ITB plenums	Norbie	Thu, 01 January 2004 08:32
	Re: ITB plenums	BigWorm	Fri, 02 January 2004 12:56
	Re: ITB plenums	ed_ma61	Fri, 02 January 2004 13:52
	Re: ITB plenums	Jayem	Fri, 02 January 2004 18:05
	Re: ITB plenums	Grega	Fri, 02 January 2004 22:02
	Re: ITB plenums	rokusan	Tue, 04 January 2005 09:46
	Re: ITB plenums	mrshin	Tue, 04 January 2005 10:22
	Re: ITB plenums	Cool1	Tue, 04 January 2005 10:36
	Re: ITB plenums	mrshin	Tue, 04 January 2005 11:41
	Re: ITB plenums	Cool1	Tue, 04 January 2005 12:16

Previous Topic:	what conersion ?
Next Topic:	3S-GTE RWD

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.