After upgrading the headlights and playing with the indicator switch to change between Hi/Low beam something puzzled me:
Is the lever supposed to be pulled toward or away from you to engage the highbeam?
On my '74 TA22 in the forward position it is in low-beam, however I think this maybe wrong because to use the 'flash' feature to high it is not possible without actually turning them on fully.
Whilist in the high-beam position (closest to me) I can pull the lever a little toward me again which messes with the high/low again. Which makes be think that the most rearward position for the lever is actually for low beam, and you can just pull it a bit to 'flash' the high-beams. Then push the lever foward for full high beam.
Does this make sense? is the former example I gave the way its supposed to be? The car was rebuilt before I got it, so I believe the wiring may have beem messes up a wee bit.
If no sense can be made of this then someone tell me what their standard lights switching pattern is.
Sat, 03 January 2004 16:14
