| Author | Topic |
|---|
Location:
Ipswich
Registered:
May 2002
|
|
Wiring questions
|
Mon, 12 January 2004 12:15
|
 |
Currently wiring up a small port 4AGE loom into a KE35 Corolla, have a few questions:
1) 4AGE has bipolar (or something) ign barrel, can I just wire both circuits up to my ign barrel? They run through a 40A and 30A fusible link, do I need to run these fusible links too? I've got a 100A circuit breaker on the battery (in the boot). I don't have the 4AGE fuse box so don't have any fusible links or fuses or relays at the moment.
2) 4 wires that I think go to the ign barrel in the 4AGE. I have IGN (B-O) and ST1 (B-W), do I wire up the other two (both B-R, one big, one small) to AM and ACC?
3) Input power to the EFI loom
- 10A Ignition - do I just take this off any wire that has power on IGN on?
- 15A EFI - is this a constant power source?
4) EFI Main relay, can I just use a 30A generic relay?
5) Circuit Opening Relay, I would assume I need to find/buy one of these, I can't run a generic relay?
6) I have a whole heap of wires that I think are meant to go to the dash (or somewhere thereabouts). I have identified tacho and fuel wires, any one have any idea what the rest are?
7) Next to the distributor plug there is a 6-pin plug, what is this?
So as far as I can tell I need to wire in the ign barrel (4 wires?), and the 4 power sources (10A IG, 15A EFI, 15A STOP and 7.5A GAUGE) and I should be set as far as power goes? Where do the big white wires go? I know they're meant to be to power, but they don't seem to go anywhere in the actual engine loom?
Thanks 
|
|
|
| | Subject | Poster | Date |
|---|
 |
Wiring questions
|
demuire | Mon, 12 January 2004 12:15 |
|
Re: Wiring questions
|
Cool1 | Mon, 12 January 2004 12:21 |
|
Re: Wiring questions
|
demuire | Mon, 12 January 2004 12:33 |
|
Re: Wiring questions
|
Cool1 | Mon, 12 January 2004 12:39 |
|
Re: Wiring questions
|
demuire | Mon, 12 January 2004 12:41 |
|
Re: Wiring questions
|
rxtoy | Mon, 12 January 2004 12:48 |
