Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 18rc idle/rev problems

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
munki
Forums Junkie


Location:
Gold Coast
Registered:
October 2002
18rc idle/rev problems Fri, 16 January 2004 04:21 Go to previous message
Hi

Well just after the recent queensland cruise i blew my headgasket. Now this is the second head gasket i have replaced and the first that has had problems with.

The car when cold has a bad miss up through the rev range and the car will backfire out of the carby. when warmed up at idle the car has a lumpy idle and is perfectally smooth just past idle 1200 revs ish right up until 49-5200 revs where it seems to not rev any futher. (like a rev limiter in an efi car).

I can see that the spark is arcing across at the coil was going through the coil to the pos side of the coil. now the coil is replaced it still goes to the pos side but through the rubber from the lead.

also could i have a manafold leak? would this cause my symptons?

and i noticed when i got the manifold gasket there was no separation between the exhaust ports 2 and 3 on the gasket could this be the problem? (the car has extractors)

Any susgestion is appriceated as i am running out of ideas

thanks

Daniel
  Send a private message to this user    

SubjectPosterDate
Read Message   18rc idle/rev problems  munkiFri, 16 January 2004 04:21
Read Message   Re: 18rc idle/rev problems thechucksterFri, 16 January 2004 10:12
Read Message   Re: 18rc idle/rev problems people100Fri, 16 January 2004 11:00
Read Message   Re: 18rc idle/rev problems munkiSat, 17 January 2004 00:22
Read Message   Re: 18rc idle/rev problems ConquestSat, 17 January 2004 03:06
Previous Topic:HELP - inlet/exhaust manifold bolts on a 3K!!!!
Next Topic:mpfi vs efi vs carb

Goto Forum:
-=] Back to Top [=-

Current Time: Sun Apr 6 10:39:26 UTC 2025

Total time taken to generate the page: 0.0065090656280518 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.