wtd: engine bay wiring diagram for TA23 and or RA28
Fri, 16 January 2004 13:04
any idea where i can get this? haynes manuals for early celicas are pretty rare second hand over here and i can't really justify buying a new one at the moment.
my main problem is the black with yellow stripe wire coming out either side of the engine bay with a plug on it the same as the indicator plugs, what's it for? i've also got a couple of problems with what goes to the coil and alternator. i swapped my loom in from my RA28 so it should've all just matched up but a couple of wires came loose.
for my coil i've got 3 wires going in, 1 to the negative terminal and 2 to the positive. where should these come from? and for the alternator i've just got one wire coming off that goes to the battery (amongst other things), there was a second wire but it ended up going nowhere.
the engines a 3 litre V6 out of an early capri but most of the looms only got minor changes, nothing changed behind the 3 plugs behind the front guards.
and before anyone asks i'm using the ford boat anchor cause its what i've got, i've got plans for a 1uz-fe conversion down the track but i crashed the car that was meant to be the funds for that and i don't want a 3-4 year project so i'll get it on the road for a couple of years till i can afford to do the conversion properly.
Fri, 16 January 2004 13:04
but most of the looms only got minor changes, nothing changed behind the 3 plugs behind the front guards.
