F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Need help from xA6x owners Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Purple_Beasty Regular Location: New Zealand Registered: May 2002	Need help from xA6x owners Sat, 31 January 2004 11:05 Just need to get some measurements to assist with the IRS conversion in my RWD Starlet. Prefer from a standard car, but a nice handling, evenly lowered car will do. Need the following measurements- Front crossmember to ground (both sides) Measurements from ground to each of the 4 rear IRS mounts (to the floorpan not the rear crossmember) Diff and floorpan section I am using is from a TA63, but I understand the floorpan is shared with the RA63, and the MA61 (other than the extended front). Any help would be very appreciated, I want to ensure I match the mounting heights for the front and rear crossmembers to avoid any odd handling issues. Thanks Callum [Report message to a moderator]

	Subject	Poster	Date
	Need help from xA6x owners	Purple_Beasty	Sat, 31 January 2004 11:05
	Re: Need help from xA6x owners	ThatDogsFullySickMate	Sat, 31 January 2004 11:23
	Re: Need help from xA6x owners	V8_MA61	Sat, 31 January 2004 11:24
	Re: Need help from xA6x owners	ThatDogsFullySickMate	Sat, 31 January 2004 11:40
	Re: Need help from xA6x owners	Stefan	Sat, 31 January 2004 13:03
	Re: Need help from xA6x owners	ThatDogsFullySickMate	Sat, 31 January 2004 23:17
	Re: Need help from xA6x owners	c2888	Sat, 31 January 2004 14:05
	Re: Need help from xA6x owners	Purple_Beasty	Sat, 31 January 2004 18:06
	Re: Need help from xA6x owners	c2888	Sun, 01 February 2004 00:19
	Re: Need help from xA6x owners	Purple_Beasty	Sun, 01 February 2004 08:55
	Re: Need help from xA6x owners	Purple_Beasty	Mon, 02 February 2004 10:08

Previous Topic:	1uz to w58 gearbox bell housing
Next Topic:	diff ratio with 4AGZE or GTE

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.