I just bought an AE92/94 for the gf. Just did an oil change today and one thing I didn't check before I bought it was whether there was much air/blowby coming out through filler cap when car was running. I did this today after the oil change and oil started spitting out, not too much but enough to put oil cap back on quick. I notice the 4AFE has the 2nd camshaft running off the 1st with a large gear that is exposed when you have the filler cap off..is this normal for it to spit out some oil due to the design. Can somebody please check if there's does this... I also checked the PCVs, where I thought the line would be pushing air back into inlet (as in my GE), it was in fact sucking air..please check out the pic. Could anybody enlighten me on this? Hope I haven't bought her a dud Should there be vacuum in the top of the engine like this? The car seems to run smoothly, decent power..for an auto 4AFE anyway. Thanks
Sat, 14 February 2004 14:15
Should there be vacuum in the top of the engine like this? The car seems to run smoothly, decent power..for an auto 4AFE anyway. Thanks 
