| Author | Topic |
|---|
Location:
Auckland NZ
Registered:
December 2003
|
|
which steering knuckles for TA23 with corona front struts
|
Fri, 20 February 2004 09:29
|
 |
ok, i'm about half way through the pug/hilux/corona front brake upgrade (check the tech articles for more info) and my problem is that my rt132 struts don't bolt up to my TA23 steering knuckles (steering arms, drop arms, the bits that attach the steering rack to the strut, they bolt on to the two ball joints), the TA23 knuckles have an 85mm dowel spacing and the corona struts have a 90mm spacing. this wasn't mentioned in the tech article and i haven't read anything about anyone else having this problem, i don't know why i am and i don't really care, i just want to know how to fix it.
i've tried MA61 Celica and MX6* Cressida, they both have the right dowel spacing but they don't fit onto my ball joints. through a different article i (think) that RA65 (are these the same as the MA61, i thought they would be) and ST141 ones are the two that will fit. since i can't find an RA65 or an ST141 will ST140 ones be the same? i've already shelled out for two sets that are now useless to me so i don't really want to have to again.
would the RT132 ones have done the trick? they've crushed it now but if i have to i might be able to find another one.
cheers
Matt
sorry about writing a book, i couldn't think of a shorter way to write it
|
|
|
