A modified Mazda RX7 Series4 intercooler in good condition was semi polished but will need abit of rub over and wash out from sitting around. I had the inlet changed to face the back originally it stuck out the side.
Overall dimensions are about 300x300x60mm, inlet and outlet are about 2inches i have included an adaptor to make one of them 2 and 1/2 inch.
Comes with abit of piping as follows:-
3 2 and 1/2 inch 90 degree mandrel bends (Mild Steel)
4 2 inch 90 degree mandrel bends (Mild Steel)
3 various lengths of 2 and 1/2 inch pipe (Mild Steel)
2 various lengths of 2 inch pipe (Mild Steel)
1 length of 2 inch silicone pipe (about 30cms long)
1 length of 2 and 1/2 silicone pipe (also about 30cms long)
1 Nissan RB20DET crossover pipe
1 90 degree silicon bend (2 and 1/4 inch i think) might be handy for something
4 hose clamps (more will required)
I was going to use all this stuff but im now selling my car so its not that much use to me. None of this stuff was fitted on a car.
I dont want to seperate anything at this stage, would really prefer to sell it all in the one hit plus its all packed neatly into a box now ready to be posted to where ever. Postage shouldnt be anymore than $20 or $30 to anywhere in Aust.
Any questions feel free to call me 0418 254 500 (Brett) or just reply here.
$250 for the lot plus postage or i might swap for something of interest like a PS2, XBox, doesnt have to be one of them although im considering buying one atm.
Just let me know what stuff you have i might be interested, you never know.
Doesnt matter if its car related or not.
Wed, 25 February 2004 03:51
