| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
|
URGENT: DOES ANYBODY HAVE AE92 GZE DRIVESHAFTS THEY CAN MEASURE
|
Mon, 26 August 2002 00:03
|
 |
Hi,
Does anybody have a pair of AE92 GZE driveshafts lying around they could measure for me.
Need connecting shaft thickness, outer cv to hub splined end thickness, number of splines on outer cv joint to hub end.
Also, if possible, number of splines and distance between splines on connecting shaft to outer cv end that Outer CV joint splines onto.
If anybody has this or could measure it would be very helpful.
I have driveshaft dilemmas with fitting 97 MR2 Turbo shafts, the Outer CV to hub end is 3mm too large, splined end is 30mm, Corolla and Celica hubs only take 27mm end.
MR2 Turbo takes a 30mm end, and I believe the V6 Camry might be the same.
Michael
|
|
|
