Author | Topic |
Location: Adelaide
Registered: April 2003
|
ae92 brake info & compatibility
|
Sun, 18 April 2004 15:02
|
|
Ok... before you all flame me I've already read the http://www.twincam.org/forums/index.php?showtopic= 1063 FAQ but I still have some questions.
From the FAQ:
"The "normal" (non-Superstrut) AE101 brakes use a 255mm dia * 22mm thick disc and use the same single piston caliper as both of the AE92 series SX brakes."
That suggests that both the series SX has the same calipers is that true because they run different sized discs. Also the FAQ says
"2.) If you already have early series AE92 SX front brakes (238mm dia * 18mm thick vented discs). You have two options :
a.) You can simply bolt on late series AE92 (SX Seca / GTi) 258mm dia * 22mm thick vented discs and calipers."
But if the 2 calipers were the same why would you replace the early model one?
Which brakes were on the ae92 ultima and RV? I know they were vented but were they the same as the early SX or the late SX??
Does anyone out there have ae101 superstrut calipers under an aftermarket 14 inch rim WITHOUT SPACERS? I've got 14 inch rims and I'm not sure if I should start looking for superstrut calipers or not.
Is the difference between the series 2 SX ae92 calipers and the ae101 superstrut dramatic? Stopping power? Pedal feel? Worth it upgrading from series 2 SX ae92?
How about ae111 brakes? Which calipers did these cars have? Compatible with ae92?
Thanks in advance
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: ae92 brake info & compatibility
|
Sun, 18 April 2004 22:38
|
|
when I changed from AE92 Levin GTZ brakes (same as S2 SX) to the superstrut setup, the difference was HUGE. Much more stopping power and better pedal feel. Even my GF commented on how much better the car stopped after the upgrade (she used the car as her daily driver). The twin piston setup combined with the larger pad area and thicker disc is a great simple upgrade for the ae92. I've got another set which is going on another ae92 I jave here as the S2 brakes are crap in comparison...
as for the advantages of changing from S1 to S2 brakes, the bigger diameter and thicker discs are a definate improvment, but still nothing to write home about IMHO.
|
|
|
Location: Adelaide
Registered: April 2003
|
Re: ae92 brake info & compatibility
|
Mon, 19 April 2004 11:12
|
|
jasonp1977: Both cars have 15 inch or bigger rims?
|
|
|
Location: Sydney
Registered: January 2004
|
|
|
Location: Brisbane
Registered: May 2002
|
Re: ae92 brake info & compatibility
|
Mon, 19 April 2004 11:42
|
|
yes they both had 15's and there wasn't much clearance, about 5-10mm maybe
|
|
|
Location: Sydney, OZ
Registered: May 2002
|
Re: ae92 brake info & compatibility
|
Tue, 20 April 2004 05:38
|
|
I've use AE102 on my G/F's AE82- dia 255mm,22mm thickness,these also have a larger pad area than both AE92 and AE101's and will fit inside 14" rims
Quote: | as for the advantages of changing from S1 to S2 brakes, the bigger diameter and thicker discs are a definate improvment, but still nothing to write home about IMHO.
|
I think there would be very little noticeable improvement, in exception of brake fad with the S2, still the choice set are the AE92 and AE101 GZE twin spots.... and if your still not satisfied, well...
GTR and custom two piece rotors!! which just fit inside, ie about 1-2mm clearance, a correctly offsetted 15" rim (16" shown).
|
|
|
Location: Adelaide
Registered: April 2003
|
Re: ae92 brake info & compatibility
|
Tue, 20 April 2004 12:30
|
|
Johnny wrote on Tue, 20 April 2004 15:08 | I've use AE102 on my G/F's AE82- dia 255mm,22mm thickness,these also have a larger pad area than both AE92 and AE101's and will fit inside 14" rims
|
Ae102 is the aust spec corolla with the 7afe yes? This caliper is different from all ae92 calipers? Was the upgrade worth it or would you go for superstrut calipers if you were to do it again?
Ok... so to recap
ae101 single piston is the smallest of the ae100 series?
(Is this the same as the series 2 ae93 sx caliper?)
ae102 single piston caliper is slightly bigger than ae101 caliper
ae101 with superstrut suspension has two pistons and has the biggest surface area of the lot.
Is this all correct?
|
|
|
Location: Sydney, OZ
Registered: May 2002
|
Re: ae92 brake info & compatibility
|
Tue, 20 April 2004 13:24
|
|
Quote: | Ae102 is the aust spec corolla with the 7afe yes? This caliper is different from all ae92 calipers?
|
yes and yes, I can really remember ifits the actual caliper that sit taller or the mounting on the hub assembly, but they are(calipers) interchangeable
Quote: | Was the upgrade worth it or would you go for superstrut calipers if you were to do it again?
|
Hey look at the major up grade I did, I just use the left overs from the GTR onto rolla conversion, and they were a bigger setup then AE101 20V ones on the Front cut, and work well on the rally car I did the conversion on, so it was an easy choice... Sure the Twin spot do give a bit better stopping and better pad wear over the AE102's, but with a good match in pads and disc's they do stop very well.
Quote: | ae101 single piston is the smallest of the ae100 series?
(Is this the same as the series 2 ae93 sx caliper?)
ae102 single piston caliper is slightly bigger than ae101 caliper
|
Yes
Quote: | ae101 with superstrut suspension has two pistons and has the biggest surface area of the lot.
|
Better Force acting on the pad area... I really remember Pad area of AE101 twins Vs AE102
|
|
|
Location: Adelaide
Registered: April 2003
|
Re: ae92 brake info & compatibility
|
Mon, 26 April 2004 05:51
|
|
Johnny wrote on Tue, 20 April 2004 15:08 | I've use AE102 on my G/F's AE82- dia 255mm,22mm thickness,these also have a larger pad area than both AE92 and AE101's and will fit inside 14" rims
|
I checked the dba website and those specs are for the ae102 disc (DB709). How did you get around the 55mm diameter centre hole?? I was thinking of just using of just using ae93 series 2 sx discs DB708 with the ae102 calipers. This disc is an extra 3 mm in diameter but has the 54mm centre hole. Do you think there would be enough clearance between the disc and the caliper??
|
|
|
Location: Sydney, OZ
Registered: May 2002
|
Re: ae92 brake info & compatibility
|
Mon, 26 April 2004 23:39
|
|
AE10# hub assembely... I had an AE101 front cut handy. SSS sell the whole strut with brakes quiet cheap.
Quote: | I was thinking of just using of just using ae93 series 2 sx discs DB708 with the ae102 calipers. This disc is an extra 3 mm in diameter but has the 54mm centre hole. Do you think there would be enough clearance between the disc and the caliper??
|
That could be very close, the only way is to measure.
|
|
|
Location: Adelaide
Registered: May 2003
|
Re: ae92 brake info & compatibility
|
Tue, 27 April 2004 02:22
|
|
And yes 15" rims or greater required on the superstruts.
|
|
|
I supported Toymods
Location: Sutho/Hills NSW
Registered: September 2002
|
Re: ae92 brake info & compatibility
|
Tue, 27 April 2004 06:46
|
|
the RV has the series 2 discs, not 100% sure on the ultimas setup.
Ultimas also came with rear discs to broaden the chance of fitting a rear disc setup.
|
|
|