F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Electronic guru's : Modifying ACIS Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
BlackSupra Forums Junkie Registered: August 2002	Electronic guru's : Modifying ACIS Sun, 25 April 2004 12:26 "Acoustic Control Induction System: The ECU controls the position of the intake air control valve based on input signals from the throttle angle (VTA) and engine RPM (Ne). The VSV, which controls the vacuum supply to the actuator, is normally closed and passes vacuum to the actuator when it is energized by the ECU." When the valve is open im led to believe the ECU advances the timing as well. The question i ask is, how difficult is it to rig up some form of dodgy electronic interceptor to change the point at which VSV receives power(or is earthed)? Like an adjustable pot to either bring the VSV into play earlier or later in the rev range? Easy? hard? Feel free to shoot me down if you may so wish, but a flat spot in my dyno graph needs fixing [Report message to a moderator]

	Subject	Poster	Date
	Electronic guru's : Modifying ACIS	BlackSupra	Sun, 25 April 2004 12:26
	Re: Electronic guru's : Modifying ACIS	thechuckster	Sun, 25 April 2004 12:58
	Re: Electronic guru's : Modifying ACIS	mrshin	Mon, 26 April 2004 01:25
	Re: Electronic guru's : Modifying ACIS	BlackSupra	Mon, 26 April 2004 07:30
	Re: Electronic guru's : Modifying ACIS	gianttomato	Mon, 26 April 2004 08:16
	Re: Electronic guru's : Modifying ACIS	justcallmefrank	Mon, 26 April 2004 09:39
	Re: Electronic guru's : Modifying ACIS	ed_ma61	Mon, 26 April 2004 12:40
	Re: Electronic guru's : Modifying ACIS	BlackSupra	Mon, 26 April 2004 08:40
	Re: Electronic guru's : Modifying ACIS	ed_ma61	Mon, 26 April 2004 12:38
	Re: Electronic guru's : Modifying ACIS	mrshin	Mon, 26 April 2004 12:34
	Re: Electronic guru's : Modifying ACIS	BlackSupra	Mon, 26 April 2004 12:36
	Re: Electronic guru's : Modifying ACIS	mrshin	Mon, 26 April 2004 12:38
	Re: Electronic guru's : Modifying ACIS	BlackSupra	Mon, 26 April 2004 12:43
	Re: Electronic guru's : Modifying ACIS	ed_ma61	Mon, 26 April 2004 12:45
	Re: Electronic guru's : Modifying ACIS	BlackSupra	Mon, 26 April 2004 12:52

Previous Topic:	76 crown weight
Next Topic:	Convert KE20 stud pattern to 114.3 PCD?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.