| Author | Topic |
|---|
Location:
Brisbane, Queensland
Registered:
May 2002
|
 jamming 2tg cam
|
Fri, 06 September 2002 21:57
|
 |
Ok tady I am taking my block to get bored out, but a problem that I have found it that the dummy cam for the 2tg does not fit inside the cam bearings in the 3t block, do I need 2tg bearings for this or sould I just machine the dummy cam till it fits?
also BIGGGGG problem.
I can't find the lock key for the gears on the dummy cam, what should I do?..I've looked in all the boxes of stuff that I bought and still can't find it, does anyone have a spare one that I could buy?...or even a dead 2tg that I can use for parts?
thanks for letting me ramble on.
|
|
|
Location:
Tasmania
Registered:
May 2002
|
|
Re: jamming 2tg cam
|
Sat, 07 September 2002 05:13
|
|
Don't machine the dummy cam, only pollish it if anything. Just use 2T bearings if the 3T ones don't fit. I was not aware of this problem, first I have herd of it.
Any engine rebuild shop will be able to give you a 1/2 moon key, no problem.
Make sure you rotate the cam bearings not used, (take out and reinstall blocking oil holes.)
|
|
|
| Current Time:
Fri Apr 11 08:16:41 UTC 2025 |
Total time taken to generate the page: 0.0050439834594727 seconds |
