| Author | Topic |
|---|
Location:
Gold Coast
Registered:
June 2004
|
|
1jz-gte boost controller installation
|
Wed, 09 June 2004 13:26
|
 |
hey
wondering if anyone can help me out, im trying to fit a manual boost controller onto a 1jz, and i understand that i have to have the line from each turbo compressor housing join with a "T" connector to the boost controller and the same with the waste gate actuator lines. But i noticed on the turbo closest to the back of the engine bay, that there are 2 lines coming off the waste gate actuator that are joined into 1 single line, unlike the other turbo which only has 1 line off its waste gate actuator. Do i connect this single line into the manual boost controller along with the other line from the other turbo, or is 1 of the off of the lines off the waste gate actuator i mentioned meant to be disconnected and blocked an if so is it the top line or the bottom line.
Thanks if anyone can help me
|
|
|
