| Author | Topic |
|---|
Location:
Burwood VIC
Registered:
March 2004
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Fri, 25 June 2004 13:11
 
|
 |
|
I'm guessing offset is 25-30?
|
|
|
Location:
Burwood VIC
Registered:
March 2004
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Sat, 26 June 2004 10:44
|
|
There is 135mm clearance behind the wheel, offset, so many numbers what means what?? There is heaps of room for brakes etc.
If you are really int PM or ring me and I'll send the whole lot. Nice wheels though.
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Sat, 26 June 2004 13:50
|
|
on the back of the wheels, there should be a number (apart from the 17x7JJ and all that) it will most likely be 20, 25, 30, 35, 40
if it happens to be 0, 5, 10, or 15 I'll have your babies and buy those rims 
|
|
|
Location:
Melbourne
Registered:
March 2003
|
|
|
I supported Toymods
Location:
Epping, Sydney
Registered:
May 2002
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Sun, 27 June 2004 09:20
|
|
I know
hence I'm not expecting the offset to be 0-20
|
|
|
Location:
Perth, WA
Registered:
September 2003
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Tue, 29 June 2004 10:51
|
|
rims look nice..
can anyone shed some light if these will fit my brothers 1980 Sigma?? Probably the wrong place to ask, but whats the stud pattern/offset of a sigma anyway?? 
Damo
TRD 83
|
|
|
Location:
Burwood VIC
Registered:
March 2004
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Tue, 29 June 2004 11:43
|
|
Alloys are clearly stamped on the inside on One of the Spokes:
Made In Japan
2 U 21
and thats it, thats why I took pains to measure the actual clearance on the back of the flange
They have quite a bit of offset - ie - lots of space on the inside of the wheel, but then, they're pretty wide too.
Nice wheels.
Would not fit Sprinter/Sigma without around 15-20mm spacer so that'd mean longer wheel studs, then they should fit!
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: 16 x 7 Alloys 5 Spoke RWD 4 x 114.3mm $500 Melb
|
Wed, 30 June 2004 08:54
|
|
|
Sylvias run a "typically FWD" offset, so these rims will always have difficulty clearing front struts on any RWD car. The Sigma PCD is the same, but they also run a lower RWD offest, so won't fit.
|
|
|
