| Author | Topic |
|---|
Location:
Perth,western australia
Registered:
December 2003
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Sat, 26 June 2004 05:21
 
|
 |
i can get photo's of stuff aswell if like.
cheers,
Dom
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: 2tg / 3tc parts
|
Sun, 27 June 2004 11:02
|
|
|
how much for all the engine parts..what would ne mising to make a engine?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Mon, 28 June 2004 01:57
|
|
2tg engine or 3tc engine?for teh 2tg im missing a head for a start.
i basicly have a complete bottem end,
however i sold teh injection manifold and plenum ages ago and the head not to long ago.i could get the head back,however i belive it is missing a few valves....
for the 3t engine i still have everything..
how much would you pay for a complete running 2T-GEU(head was fully recond about a 1 1/2 years ago) with K&N air filter ,4 into one extractors,gearbox ,standard ecu and loom(rebuilt less than a year ago),
plus,if you offer is high engough ill thro in a 3t block,complete with crank to make a nice hybrid.
let me know,your offer and i might take as i am interested in selling my 2tgeu at some point....
cheers,
Dom
|
|
|
Location:
perth WA
Registered:
June 2004
|
|
Re: 2tg / 3tc parts
|
Mon, 28 June 2004 14:08
|
|
|
Dom. Would that 2tgeu setup fit into a ke35?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Mon, 28 June 2004 14:24
|
|
yes it would,
my original pan was to put into a KE30.
there is a site which has plans for modifing the cross memeber to make teh 2tg fit but i cant remeber teh address sorry.
but i scrapped that plan,i figured one fast money chewing car was engough for me.
if i was going to have another money chewing beast of a car it had bloody well be able to drive up rock walls!(hence my looking for a hilux)
cheers,
Dom
|
|
|
Location:
Wa
Registered:
May 2002
|
|
Re: 2tg / 3tc parts
|
Mon, 28 June 2004 15:38
|
|
hi, im interested in the 2t-geu water intake, what condition is it in, more specificly the sensor connections, and where in perth are you?
thanks
blake
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Tue, 29 June 2004 03:29
|
|
im in tuart hill near osbourne park.
the sensor conections are ok,there is some corrosion on the water inlet but it is still in one hole peice and the corrosion is minro compared to what teh one i took off my engine was like!.
i will get a photo of it and post it,ill try for tommorrow.
cheers,
Dom
|
|
|
Location:
theres a castle on my hil...
Registered:
October 2003
|
|
Re: 2tg / 3tc parts
|
Thu, 08 July 2004 11:06
|
|
|
You still got the oil pump? Cost of post to Sydney?
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2tg / 3tc parts
|
Fri, 09 July 2004 09:01
|
|
have you still got the water intake if so could i get a pic??
email is the1steve_O@hotmail.com
cheers
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Sat, 10 July 2004 07:04
|
|
some one else has expressed in the water intake already.
if they do not buy it i'll email you.
cheers,
Dom
|
|
|
Location:
Crapberra
Registered:
September 2003
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Mon, 12 July 2004 04:46
|
|
no sorry.they only one is have is broken.
cheers.
Dom
ps
you are talking about the one that sticks out of teh head right??
|
|
|
Location:
Heathmont, Melbourne, Vic
Registered:
May 2004
|
|
Re: 2tg / 3tc parts
|
Sun, 03 October 2004 00:36
|
|
|
I'll take the AFM. I assume that its still in good working order? PM, or email me at filthman@rabbit.com.au
|
|
|
Location:
Rockingham,WA
Registered:
June 2004
|
|
Re: 2tg / 3tc parts
|
Sun, 24 October 2004 13:29
|
|
|
Are you selling the 3T crank? if so how much for? im in perth.
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Mon, 25 October 2004 02:47
|
|
DuMp- pm sent
Dom
|
|
|
Location:
Devonport Tasmania
Registered:
June 2004
|
|
Re: 2tg / 3tc parts
|
Mon, 25 October 2004 03:07
|
|
what condition are the injectors in ?
what are the seals/rings on them like ?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Mon, 25 October 2004 03:12
|
|
the injectors are preety good.
havent been used in a while but i had them all cleaned and put the best set on my car.
ill have to check the ring seals on them but they should be preety good.
ill get back to you tonight.
cheers
Dom
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts
|
Tue, 26 October 2004 13:31
|
|
|
bump.
|
|
|
Registered:
May 2002
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Thu, 28 October 2004 03:47
|
|
What are the cams? Make/specs/condition/history, etc?
Cheers
Frank
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Thu, 28 October 2004 04:06
|
|
PM sent 
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
|
Location:
Wollongong NSW
Registered:
August 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Sun, 31 October 2004 11:01
|
|
|
u still got the pistons?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Mon, 01 November 2004 03:30
|
|
yep still got the pistons.
Dom
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Mon, 01 November 2004 05:33
|
|
You still got the cams?
Con rod bearings, full set?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Mon, 01 November 2004 07:34
|
|
yep still got the cams.
yep full set of conrod bearings.
Dom
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
|
Location:
Wollongong NSW
Registered:
August 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Wed, 03 November 2004 10:40
|
|
can u post a pic of the pistons ?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
|
Registered:
November 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Thu, 04 November 2004 11:39
|
|
|
Im currently looking for a 2tg yamaha head and 45mm webbers do you have any?
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Fri, 05 November 2004 01:05
|
|
They are all Yamaha heads...
I'm lookin for twins also for 2tg...
|
|
|
Registered:
November 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Fri, 05 November 2004 01:37
|
|
|
i have seen heads with the yamaha logo and those without.
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Fri, 05 November 2004 02:52
|
|
those head with out the yamaha stamp on them are still made by yamaha,youll also notice that these heads dont have the usual numbers on the front either.
i think that they where the last heads to be made for the 2T-GEU's.
sorry but i dont have any carbs or a spare head.
in a month or two ill be selling my complete 2T-GEU.if your interested in that let me know.
cheers
Dom
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Fri, 05 November 2004 02:56
|
|
awsome, when ya selling it?
I'll give ya $100 and a drink from ma goon bag...
kiddin....
still got the cams?
gonna sell em to me at wot I recently offered? 
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Fri, 05 November 2004 05:22
|
|
sorry but no.
from your offer i would lose $100.
im not that desperate to sell them yet.
cheers
Dom
|
|
|
Location:
Adelaide, Semaphore
Registered:
September 2004
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Fri, 05 November 2004 08:45
|
|
|
Maybe you will be happier with $190.. hows that....
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-new parts added!!
|
Wed, 17 November 2004 01:50
|
|
bump.
still for sale prices changed.
cheers
Dom
|
|
|
Location:
Rockingham,WA
Registered:
June 2004
|
|
Re: 2tg / 3tc parts-prices dropped!!
|
Tue, 23 November 2004 14:27
|
|
|
any idea about postage or freight costs of the 3tc engine?
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-prices dropped!!
|
Wed, 24 November 2004 01:48
|
|
pm sent.
Dom
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: 2tg / 3tc parts-prices dropped!!
|
Wed, 24 November 2004 11:39
|
|
still have that 261 head?
thanks..
|
|
|
Location:
Perth,western australia
Registered:
December 2003
|
|
Re: 2tg / 3tc parts-prices dropped!!
|
Thu, 25 November 2004 01:18
|
|
the only 2tg head i have is the one that is in my 2tgeu.
its unnumbered.
Dom
|
|
|
Location:
Perth
Registered:
July 2004
|
|
Re: 2tg / 3tc parts-prices dropped!!
|
Thu, 25 November 2004 01:24
|
|
oh okay..
thanks. eheh.
lettus know if ya part that
|
|
|
