| Author | Topic |
|---|
Forums sponsor
Location:
Perth
Registered:
August 2002
|
|
What aftermarket cams duration and lift do i need? Going for set of TODA Cams
|
Fri, 09 July 2004 07:25
|
 |
Hi guys,
I need some advice and experience with choosing some cams.
I am about to run a 4agze bottom with custom forge pistons with a 20 valve silvertop head. I have a custom exhaust manifold to bolt on an hks or s15 turbo. I have a custom plenum intake manifold made up to be used with the quad throttle bodies.
My question I will be purchasing a set of cams, valve springs, cam gears and valve train kit(if need it). What lift before i need the valve train kit, brand prob be toda.
I would like some advice on what sort of cam duration and lift will i need, I dont mind the car idling rough,What sort of cams would suit the turbo setup to extract most power? What sort of lift can i go b4 i have to get the valve train kit? Will i need to change the valves to something stronger because of running force induction? I was thinking something along the lines of 272 duration and 9mm lift. Is this too much?
Advice and opinons please
thanks
|
|
|
