| Author | Topic |
|---|
Location:
Adelaide
Registered:
July 2002
|
|
4age error codes 51, 43
|
Tue, 13 July 2004 00:13
|
 |
hi i've had these codes flash up on my check light when i do the test on it and from what i found they dont sound important but the check light has come on twice for me when i have given it a bit of boot for a while
error 43 - Starter No starter signal to ECU when cranking in TEST mode. Terminal STA on ECU
I didnt wire the car so maybe the auto elect missed this one?
error 51 - Switch condition signal Displayed when A/C is on when TE1 and E1 connected in test mode
I dont have A/C in the car, well most of the wiring is there but no compressor, the vacuum line on top of the throttle body is blocked off.
I also got this error once before but it hasnt showed up again
error 42 - Vehicle Speed Sensor No speed sensor signal to ECU when loaded driving condition with engine speeds 2000 to 5000 rpm. for 8 seconds or more.
Maybe this is because i am using the 4AC gear box and its mechanically driven to the spedo?
Are any of these codes something i should worry about??
Thanks
|
|
|
| | Subject | Poster | Date |
|---|
 |
4age error codes 51, 43
|
Hunty | Tue, 13 July 2004 00:13 |
|
Re: 4age error codes 51, 43
|
cam_RA40 | Tue, 13 July 2004 01:23 |
