| Author | Topic |
|---|
Location:
sydney - paramatta
Registered:
March 2004
|
|
temperature guage problem
|
Sat, 17 July 2004 09:21
|
 |
Whats doin' mario, ive tried using the SEARCH function but still
no answer. so ill be straight forward:-
guage:
- SPECO temp guage.(aftermarket)
discription:
- reads temp
- connection sticking out has small copper pipe with solder in it.
car:
- 75 ta22
discription:
weapon.
stock guage:
- 75 ta22 temp guage
discription:
- never gets to 80 degrees, usually sits on 50 - 70.
is that a problem?
stock sensor:
- temp sensor on 2tgeu
(i dont know which it is, thermal or semiconductor)
discription:
- thermal contains electrical resistor varies with temp
- semicondictor consists of spring-loaded alloy disc or pellet
inside copper housing.
result:
no change in temp when aftermarket temp guage is connected to stock temp sensor at normal operating temps.
question:
what is the right connection for the aftermarket temp guage.
including temp sensor unit and connection medium between guage and sensor.
any advice or abuse will be great.
[Updated on: Sat, 17 July 2004 09:25]
|
|
|
| | Subject | Poster | Date |
|---|
 |
temperature guage problem
|
w810sc | Sat, 17 July 2004 09:21 |
