F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Clutch Issues - not disengaging correctly Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Skip Forums Junkie Location: Perth Registered: October 2003	Clutch Issues - not disengaging correctly Tue, 03 August 2004 00:02 After completing my conversion I quickly killed my first clutch, which, with in the car drove fine. I replaced my clutch and at the same time kept the first pressure plate but had it modified to propbably 50% more clamping load (up around 3000kg now). Ever since this my clutch has been getting worse and worse. When i drive the car around normally its alright but when i flog it my gear changes crunch, and sometimes i cannot find a gear at all i have to keep clucthing in and out until it eventually pops into a gear. Its pretty safe to assume that my clutch is not disengaging all the way. Last night i noticed brake fluid leaking from the master cylinder push rod boot inside the car. Could a screwed seal in the master be the problem? Bypassing pressure? Or maybe will I have to increase the length of the master pushrod for more clutch travel? Cheers [Report message to a moderator]

	Subject	Poster	Date
	Clutch Issues - not disengaging correctly	Skip	Tue, 03 August 2004 00:02
	Re: Clutch Issues - not disengaging correctly	joecoolmk2	Tue, 03 August 2004 01:55
	Re: Clutch Issues - not disengaging correctly	ra23celica	Tue, 03 August 2004 02:09
	Re: Clutch Issues - not disengaging correctly	joecoolmk2	Tue, 03 August 2004 02:27
	Re: Clutch Issues - not disengaging correctly	Skip	Tue, 03 August 2004 04:45
	Re: Clutch Issues - not disengaging correctly	joecoolmk2	Tue, 03 August 2004 10:35
	Re: Clutch Issues - not disengaging correctly	Pewee	Tue, 03 August 2004 11:08
	Re: Clutch Issues - not disengaging correctly	Skip	Tue, 03 August 2004 23:39
	Re: Clutch Issues - not disengaging correctly	Maurice c	Tue, 03 August 2004 23:59
	Re: Clutch Issues - not disengaging correctly	mrshin	Wed, 04 August 2004 00:20
	Re: Clutch Issues - not disengaging correctly	Pewee	Wed, 04 August 2004 09:25
	Re: Clutch Issues - not disengaging correctly	Skip	Thu, 05 August 2004 04:45
	Re: Clutch Issues - not disengaging correctly	lumpy	Thu, 05 August 2004 07:12
	Re: Clutch Issues - not disengaging correctly	lumpy	Thu, 05 August 2004 07:12
	Re: Clutch Issues - not disengaging correctly	wagonist	Thu, 05 August 2004 05:43
	Re: Clutch Issues - not disengaging correctly	Skip	Thu, 05 August 2004 08:55
	Re: Clutch Issues - not disengaging correctly	Skip	Fri, 13 August 2004 01:43
	Re: Clutch Issues - not disengaging correctly	RobST162	Mon, 30 August 2004 05:28
	Re: Clutch Issues - not disengaging correctly	Skip	Mon, 30 August 2004 05:57

Previous Topic:	Removing RA28 side windows
Next Topic:	Tacho Shorting out igition system

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.