Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » oil pressure on 3SGTE

Show: Today's Posts  :: Show Polls 
Email to friend 
Switch to threaded view of this topic Create a new topic Submit Reply
AuthorTopic
SXY184
Regular


Registered:
January 2004
oil pressure on 3SGTE Tue, 03 August 2004 08:27 Go to next message
hey all, jus a quick question, whats the stock oil pressure for a gen 2 3SGTE at idle ?
any help , many thanks!
  Send a private message to this user    
510rob
Regular


Location:
Vancouver
Registered:
June 2004
Re: oil pressure on 3SGTE Tue, 03 August 2004 10:15 Go to previous messageGo to next message
http://www.mr2-tech.com/bgb/mechanical/volume1/lub rication_system/3.htm

Oil pressure at idling = "4.3psi or more" (suprisingly low!!!)
Oil pressure at 3000rpm = "36psi - 71psi" (pretty wide range!!!)
  Send a private message to this user    
Joshstix
Forums Junkie


Toymods Vice President

Location:
Sydney
Registered:
May 2002
Re: oil pressure on 3SGTE Wed, 04 August 2004 02:15 Go to previous message
The pressure take off point is very high on the engine and a long way fromt the pump sot there is a lot of pressure lost in the system before getting to the sender.

This compares to an engine like the 4AGE where the pressure sender is right after the pump, which will read higher due to there being no system loss between the pump and sender.
  Send a private message to this user    
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic:18RG timing chains
Next Topic:bending rear axle for negative camber
Goto Forum:
-=] Back to Top [=-

Current Time: Tue Jun 11 18:49:25 UTC 2024

Total time taken to generate the page: 0.019840002059937 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.