| Author | Topic |
|---|
Location:
Adelaide
Registered:
April 2004
|
|
URGENT HELP REQUIRED
|
Wed, 11 August 2004 13:22
|
 |
ok so i remove my entire intake system, replace my first rubber return hose from my blok, viola! no more leak.....now the car wont run properly
basically i start it, idles no worries, little bit of throttle, stall out, litte more throttle, fine, and RPMS' climb....any more than say 10-15% throttle, and it burbles, and the mix smells fuking rich as
codes = 24 Intake Air Temp. Sensor Open or short in intake air temp. sensor signal (THA).
31 Air-Flow Meter Signal Open cct in VC signal or short cct between VS and E2 when idle contacts are closed.
what do these mean, and how do i fix them.....my AFM riped open and i re-soldered the wires.....is it possible the board was shorted wen i soldered the connections back on ?
|
|
|
| | Subject | Poster | Date |
|---|
 |
URGENT HELP REQUIRED
|
Beej | Wed, 11 August 2004 13:22 |
