F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » GZE Probs Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
86sp Regular Location: Brisbane Registered: November 2003	GZE Probs Sun, 29 August 2004 11:08 I'm having a few probs with my GZE in my Sprinter. First the idle. It idles at about 1500-2000rpm with the idle screw right down and the idle speed motor unplugged. It goes even higher with this hooked up. It doesn't have any air leaks in the system. Secondly the timing. I have it set at 10deg BTDC at the idle that I have but when i rev it, it doesn't move. Should it advance or retard or something? I have been getting code 12 out of my diag plug which is RPM signal. I have tried a different computer and also have rewired the CAS to the computer, not through the loom, and it hasnt changed at all. Could the CAS be stuffed? Any help is greatly appreciated. [Report message to a moderator]

	Subject	Poster	Date
	GZE Probs	86sp	Sun, 29 August 2004 11:08
	Re: GZE Probs	Henn	Sun, 29 August 2004 11:44
	Re: GZE Probs	86sp	Sun, 29 August 2004 22:21
	Re: GZE Probs	86sp	Mon, 30 August 2004 03:55
	Re: GZE Probs	pjaw11sc	Mon, 30 August 2004 06:02
	Re: GZE Probs	86sp	Tue, 31 August 2004 05:22
	Re: GZE Probs	drift86levin	Tue, 31 August 2004 05:33
	Re: GZE Probs	86sp	Tue, 31 August 2004 08:50
	Re: GZE Probs	monkeymajik	Tue, 31 August 2004 09:13
	Re: GZE Probs	Alainve	Tue, 31 August 2004 09:11
	Re: GZE Probs	tim123c	Tue, 31 August 2004 11:03
	Re: GZE Probs	Henn	Tue, 31 August 2004 14:09
	Re: GZE Probs	monkeymajik	Wed, 01 September 2004 11:19
	Re: GZE Probs	drift86levin	Thu, 02 September 2004 06:06
	Re: GZE Probs	86sp	Thu, 02 September 2004 09:05
	Re: GZE Probs	monkeymajik	Thu, 02 September 2004 11:21

Previous Topic:	Injector sizes in some Toyota motors
Next Topic:	4agze fuel cut??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.