F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » MX83 Rotors - HELP Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
DigitalAE86 Regular Location: Melbourne Registered: May 2002	MX83 Rotors - HELP Wed, 22 September 2004 11:38 I have a set of USA spec MX83 front brake rotors that I was planning to put on an '89 Cressida. They have the following dimensions: Centre Hole - 60mm Height - 68mm Thickness - 22mm Diameter - 279mm They are the same as an Aussie series 2 MX83 rotors, except for the diameter, which is 23mm larger. I also have a set of pads (Nippon brand) that came with the rotors and they're exactly the same as the Aussie ones. How can I make these rotors fit? (Note that I have Aussie series 2 calipers). Any advice would be greatly appreciated. [Updated on: Thu, 23 September 2004 06:36] [Report message to a moderator]

	Subject	Poster	Date
	MX83 Rotors - HELP	DigitalAE86	Wed, 22 September 2004 11:38
	Re: MX83 Rotors - HELP	Norbie	Wed, 22 September 2004 23:03
	Re: MX83 Rotors - HELP	DigitalAE86	Fri, 24 September 2004 13:12
	Re: MX83 Rotors - HELP	mx83toy	Sun, 26 September 2004 04:43
	Re: MX83 Rotors - HELP	DigitalAE86	Wed, 29 September 2004 03:51
	Re: MX83 Rotors - HELP	ra23celica	Wed, 29 September 2004 06:04
	Re: MX83 Rotors - HELP	DigitalAE86	Wed, 29 September 2004 11:49

Previous Topic:	quick soarer qs
Next Topic:	Soarer SC400 92 V8 - Need Workshop Manual

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.