| Author | Topic |
|---|
Location:
Perth
Registered:
September 2004
|
|
Wrecking 4agTe and Other stuffs (Pics added of sum things)
|
Tue, 05 October 2004 13:21
|
 |
Hey guys, due to the fact i suck and have no more money to finish him, my black ke70 with the 4agte is going to be split.
If you want pics i can email them to you, im not sure how to post pics, ill search for info on how and try. but for now, ask and i shall send... well try to send 
Prices are neg to an extent, ie: if ive something for 400$ please dont pm me saying ill give you 200$ and i have to pay for freight to the eastern states haha thanks ..all constructive critisism noted, all smart ass ones ignored.
heres the list of my stuffs:
1 x Big Port Blue top head NO Cams - SOLD
1 x Small port gze head WITH cams (the model that came out in 1992ish era- $150 (has been skimmed flat, never run the mtr after the head was skimmed)
1 x Pair of blue top Big port Cams - $100
1 x FWD 100kw SMALL port manifold Reversed for RWD Application - $150,
I'm yet to clean up the welds on this yet so looks sh*t, will clean up and get some pics ASAP, I'm kinda busy so it may take till sat. Yes i want to sell it.. but be patient.
1 x 8 Bolt Flywheel. Would have to be close to brand new, came out of a wreck at Just toyota with around 30,000km/s Ive never had the pleasure of using it. Cost 400.. and then I had it faced/machined - $300
1 x SR20DET Fuel Pump, Don't know the actual specs, use google, i was told good for around 180kw's?? Don't quote me thou. Came out of a 70,000km wreck - $70
1 x 4agze Starter motor - $40 -sold
1 x 1g-gte Intercooler (One ali bracket on cooler broken off) - $100
I have the water pump also, not sure what condition this is in, ill check ASAP if anyone is interested then ill put a price on him.
1 x Gze airflow meter, will get numbers of it if anyone is interested.. Flap type.. Looks very restrictive, worth going aftermarket ecu just to avoid this brick. - $80
1 x Gze standard ECU, same deal as airflow meter as in i will get numbers etc if anyone is interested. - $120
4 x Standard Gze Injectors - $100
------------------------------
WILL SELL THIS AS A "KIT" ONLY. Please dont ask If I will seperate.. If i get desperate and choose to ill do a new post with prices for each item.
1 x CT26 Turbo, Steel wheeled of 7m supra. If any then very very very little / No shaft play, Has intake pipe bit machined out for larger air flow, I can measure if ppl need to know.
1 x Custom VERY high mount manifold. Be aware, You will need to cut your bonnet for a very tough look.. trust me.. People will phear your car. (Note, this may not be legal in your state.. so a nice little bonnet scoop will sort this.) turbo sticks out about 3cm's. Kinda the only way to fit this turbo in Just finishing off manifold now, Pics up by Sat at the latest.
1 x Braided steel line with Copper fittings for oil supply from block to ct26
1 x Steel/High temp hose Return line
1 x 3inch Dump.. thick and heavy comes with exhaust sensor "hole" (has bolt holes to bolt it in etc)
1 x 1 Wire Exhaust Sensor (brand new)
Can also throw in Gze (any diff to G-e?) sump with a pipe for the return to connect to.
Can also throw in 3 inch Side pipe (connects to dump, No Cat, Just a straight pipe that goes to about 3/4 under the front door then angles out to the outside of the car.. its not pretty. but it does the job.
asking $850 for the "kit" THIS PRICE IS NOT NEG. PLEASE DONT OFFER A PRICE. I AM FIRM AT THIS PRICE. thanks.
if you want to split it after you buy it then go ahead.
1 x Motorcycle Fuel Filler cap with 2 keys, cost 180 after i had to get the keys cut (30$ for keys!!! argh) - 100 (comes with some ke70 skin to weld it on)
1 x Ke70 Shell - No motor No Box No suspension No back doors No Bonnet No Front grill No bumpers No Fuel Filler area (it's a hole) Half a floor Bend Chassis Rails No Boot Lid
Damn I should be paying YOU to take this hahahaha I think Ill call Sims metal for that  Unless anyone wants a paperweight then come take it
2 x AE71 Cross members (For fitting a 4ag(z)e to a ke70 - $75ea
1 x Hydraulic Clutch cylinder with steel line that runs to box. - $50
2 (1 x LHS, 1 x RHS) x 4a-c (To fit 4ag(z) to X-Member)) Engine mounts, Rubber in excellent Condition - $40each
If I think of anything more Ill get the info up....
Thanks. Once again, Please no retarded comments / Stupid offers.
Sad to see it all go.
Oh Im in PERTH. If you think it's gonna be heavy then dont expect it to be post friendly. ie: It'll be expensive.. Esp. the turbo kit. Will weigh it when i get a chance.
-bc
[Updated on: Fri, 22 October 2004 03:26]
|
|
|
| Current Time:
Mon Sep 22 00:13:21 UTC 2025 |
Total time taken to generate the page: 0.004601001739502 seconds |
