So once more I have run out of ideas how to get my tacho to work. For those who have no idea what I am talking about, here is a recap. I installed a silvertop 4age engine into my 1995 corolla, running on Wolf 3D ecu so the factory ecu is gone.
I have tried to connect the IG- to everything that could give of a signal for the tacho and nothing works. There is also noting wrong with power and earth connection so it must be the ig- signal.
I have noticed that the orginal signal wire from the 4EFE distributor is not the same color as the IG- signal wire that goes to the tacho so my guess is that the signal passes through the orginal ecu. Can this be the case?
Tacho problems with my corolla silvertop swap
Sat, 16 October 2004 00:45
