F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Want some cheap neg camber on a MA61 ?????????? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
bbaacchhyy Forums Junkie Location: Adelaide Registered: September 2003	Want some cheap neg camber on a MA61 ?????????? Mon, 25 October 2004 02:12 Credit for this should go to Ed (alias Ed-MA61) as it was from his web page and numerous emails that convinced me it was possible. Basically, as part of my brake upgrade, I needed to get some more clearance between the disc and the LCA and ball joint. The RA60 strut has a different stub inclination angle (more neg camber) but all else is the same. The conversuion was duly done ($11 per strut tube from the local pick-a-part wrecker) and the hubs etc were swapped over. I managed to finally put the car on all 4 wheels last night and did a VERY ROUGH measurement on the camber, and it turns out to be about 2.1 degrees negative. Now I'll lose some of that when I put in King Std height springs instead of lows. But it is the cheapest way of getting Neg camber. Please note that the RA60 upper spring perch is no good, you must use the MA61 part, and the shockers fit, but may need a washer or two in the bottom to make up for the difference in the length of the shocker. Cheers Ed !! [Report message to a moderator]

	Subject	Poster	Date
	Want some cheap neg camber on a MA61 ??????????	bbaacchhyy	Mon, 25 October 2004 02:12
	Re: Want some cheap neg camber on a MA61 ??????????	bbaacchhyy	Mon, 25 October 2004 02:13
	Re: Want some cheap neg camber on a MA61 ??????????	gold28	Wed, 27 October 2004 10:48
	Re: Want some cheap neg camber on a MA61 ??????????	barned01	Sun, 11 December 2005 10:53
	Re: Want some cheap neg camber on a MA61 ??????????	willwal98	Sun, 11 December 2005 13:51
	Re: Want some cheap neg camber on a MA61 ??????????	munki	Wed, 27 October 2004 11:12
	Re: Want some cheap neg camber on a MA61 ??????????	bbaacchhyy	Wed, 27 October 2004 20:57
	Re: Want some cheap neg camber on a MA61 ??????????	wilbo666	Wed, 27 October 2004 23:24
	Re: Want some cheap neg camber on a MA61 ??????????	bbaacchhyy	Wed, 27 October 2004 23:30
	Re: Want some cheap neg camber on a MA61 ??????????	gold28	Thu, 28 October 2004 09:46
	Re: Want some cheap neg camber on a MA61 ??????????	HyDrA	Thu, 28 October 2004 10:14
	Re: Want some cheap neg camber on a MA61 ??????????	bbaacchhyy	Thu, 28 October 2004 21:34
	Re: Want some cheap neg camber on a MA61 ??????????	SRacin	Thu, 08 December 2005 05:09
	Re: Want some cheap neg camber on a MA61 ??????????	CrUZsida	Sun, 11 December 2005 10:40
	Re: Want some cheap neg camber on a MA61 ??????????	SRacin	Mon, 12 December 2005 00:21
	Re: Want some cheap neg camber on a MA61 ??????????	HyDrA	Sun, 11 December 2005 07:09
	Re: Want some cheap neg camber on a MA61 ??????????	gold28	Sun, 11 December 2005 18:22
	Re: Want some cheap neg camber on a MA61 ??????????	CrUZsida	Mon, 12 December 2005 10:53
	Re: Want some cheap neg camber on a MA61 ??????????	SRacin	Mon, 12 December 2005 19:50
	Re: Want some cheap neg camber on a MA61 ??????????	ajmor6	Mon, 12 December 2005 22:13
	Re: Want some cheap neg camber on a MA61 ??????????	thechuckster	Mon, 12 December 2005 23:10
	Re: Want some cheap neg camber on a MA61 ??????????	CrUZsida	Mon, 12 December 2005 23:11

Previous Topic:	soarer speedo wiring
Next Topic:	2nd. gen. 3SGTE /1ZZ-FE shimless conversion

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.