Ok, now I'm cracking up.
I have got my ecu hooked up on my 1g-gte. Not getting any spark at all. Just went and bought a new coil and ignitor. Same thing.
Question 1 (most important):
Can someone pls help me out with how much voltage I should be getting at the plug to the ignitor/coil.
I'm guessing the 4.5v is ok for the circuitry, then 12v for the coil. Is that right?
Question 2:
Also, all of the wires were different colours on my harness to the wiring diagram, I just went off the Pin outs on the diagram. is this the correct thing to do???
Question 3:
Does all the power going to the ingnitor/coil come from the ECU and the alternator??? There is no other wires that connect from the Celica harness to the ignitor/coil specifically.
Question 4:
I am close to my wits end. Any volunteers north of the bridge (syd) keen to come over and have a fiddle around?? There is free beer involved!!!!!!!!!!!!!!
Thanks for your help guys, and taking the time to read this. I am well aquainted with the search function, but my dial up connection and frustration level is not healthy for the computer.