Author | Topic |
Location: Vic
Registered: December 2004
|
looking to do 4age 20v into xt130 corona
|
Thu, 09 December 2004 11:42
|
|
Im looking into doing a 4age 20v conversion on my xt130 corona but im having trouble sourcing a rwd gearbox, if anyone could point me in the right direction it would be good. Also what is the "official" power output of the 20valves? I know they rev like all hell and are fun as in a fwd!
|
|
|
Location: Rocklea qld
Registered: February 2003
|
Re: looking to do 4age 20v into xt130 corona
|
Thu, 09 December 2004 12:11
|
|
i always thought u could just use a t50 from a ta22 celica or anything else that had a 2t engine in it T18etc...correct me if im wrong here people
|
|
|
Location: Baulko Hillo
Registered: April 2004
|
Re: looking to do 4age 20v into xt130 corona
|
Thu, 09 December 2004 12:18
|
|
Yep, T50 will bolt right up, but you will need the RWD plate/shield that goes between the box and block otherwise your bellhousing will get stuffed full of shite.
|
|
|
Location: Canberra
Registered: December 2002
|
Re: looking to do 4age 20v into xt130 corona
|
Fri, 10 December 2004 01:27
|
|
I realise that the 4age is a good engine with a lot of potential but why would you put one in a xt130 corona?
|
|
|
Location: Sydney
Registered: July 2004
|
Re: looking to do 4age 20v into xt130 corona
|
Fri, 10 December 2004 01:37
|
|
I was of the understanding that you need the T50 out of an AE86 or AE71, not one from behind a T motor.
|
|
|
Location: Newcastle
Registered: May 2002
|
Re: looking to do 4age 20v into xt130 corona
|
Fri, 10 December 2004 03:09
|
|
one has a T series bellhousing and one has a A series housing
|
|
|
Location: sunny coast, qld
Registered: October 2002
|
Re: looking to do 4age 20v into xt130 corona
|
Fri, 10 December 2004 03:16
|
|
Jason wrote on Fri, 10 December 2004 12:27 | I realise that the 4age is a good engine with a lot of potential but why would you put one in a xt130 corona?
|
4age is too gutless for a 1060kg Corona. IMO there wouldn't be enough improvement over the old shitfire to warrant the costs.
I would go for a 1g-gte if I was you
|
|
|
Club Member
Location: sydney
Registered: May 2002
|
Re: looking to do 4age 20v into xt130 corona
|
Fri, 10 December 2004 07:18
|
|
some coronas came with 4AGE as a standard option in Japan
|
|
|
I Supported Toymods
Location: Glenmore Park, NSW
Registered: March 2004
|
Re: looking to do 4age 20v into xt130 corona
|
Fri, 10 December 2004 08:01
|
|
i was under the impression you needed an A series bellhousing to mate the T50 to a 4a series motor?
ie as in a sprinter bellhousing + T50 + 4age/gze/20v
|
|
|