Author | Topic |
Location: East Maitland NSW
Registered: December 2004
|
6 speed for a celica
|
Thu, 16 December 2004 13:54
|
|
hi everyone im new to all this, but anyway i was wondering weather anyone knows weather it is possible to put a six speed manual gearbox in a RA28 celica. if so wot mods need to be done and wot would the cost be.
thanks.
|
|
|
Location: Perth
Registered: August 2004
|
Re: 6 speed for a celica
|
Thu, 16 December 2004 14:04
|
|
short answer is no...
Long answer is yes but...
Why on earth would you need a 6 speed on a ra28???
what motor are you running???
There are no gearboxes that will bolt up to the standard R block... you can get adapter plates made however...
Or you could fitt an altessa 3SGE BEAMS Motor complete with 6 speed J160 box
|
|
|
Location: East Maitland NSW
Registered: December 2004
|
Re: 6 speed for a celica
|
Thu, 16 December 2004 14:09
|
|
i am just running a standard 18r-gu.
|
|
|
Location: Perth
Registered: August 2004
|
Re: 6 speed for a celica
|
Thu, 16 December 2004 14:19
|
|
Well I would say dont bother....
You can take it to a transmission place and get them to make up an adapter plate but you will still need to source a box... If you are interested then your best bet is to look for a J160 box of the toyota rs200 altessa... Its the same 6 speed box thats on the s15 silvia...
I anlt say to use this box as it has similar dimensions to the stock W5X box
|
|
|
Location: Rocky Mountains, Canada
Registered: May 2002
|
Re: 6 speed for a celica
|
Thu, 16 December 2004 14:43
|
|
Wouldnt the Lexus IS200 6spd box be easier to find?
|
|
|
Location: Sydney
Registered: August 2004
|
|
|
Location: Sydney
Registered: June 2004
|
Re: 6 speed for a celica
|
Thu, 16 December 2004 22:49
|
|
alos you might need tomcut out the drive tunnel and make a new one as the T and R series tunnels are not all that big... as mentioned too the gear stick goes back and would be just cm from the hand brake so that might need to go back a bit too...
i am considering the Altezza box for my TA22 but no final decision yet. the only reason im considering that box is cause i get everything done for free (cutting firewall/tunnel, fitting and tail shaft)
|
|
|
Location: Sydney
Registered: March 2003
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 00:39
|
|
Yeah, i have an IS200 6 Speed for sale
|
|
|
Location: Brisbane / Gold Coast
Registered: May 2002
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 00:55
|
|
KOFFEE-BLACK wrote on Fri, 17 December 2004 11:39 | Yeah, i have an IS200 6 Speed for sale
|
Me too.
Got a mighty fifteen kilometres on it so it's basically brand-new. On the Gold Coast.
|
|
|
Location: Kita-Ku, Sapporo, Japan
Registered: January 2003
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 01:39
|
|
so they crashed the car on the way home form the dealer?
Cya, Stewart
ps,
wot wud i kneed 2 do 2 put a 6 sped box on da 4K?? nah mate it's fully stock but it's fooly sik
|
|
|
Location: PNG
Registered: June 2002
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 01:59
|
|
Hi
I have a 6 speed in my TA23. It is of course behind a 1ggte. Yes you can do it, and yes there are some difficulties. Have a bit of a search as I wrote a long article on it som months ago.
Craig
|
|
|
Location: Rocky Mountains, Canada
Registered: May 2002
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 02:12
|
|
ddeane wrote on Fri, 17 December 2004 12:29 |
I have a 6 speed in my TA23. It is of course behind a 1ggte. Yes you can do it, and yes there are some difficulties. Have a bit of a search as I wrote a long article on it som months ago.
|
Where is the article?
|
|
|
Location: PNG
Registered: June 2002
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 05:36
|
|
The search reference is corrupt, so do a search on ddeane in tech and conversions and look at the 4th item down about 21 August.
Craig
|
|
|
Location: Rocky Mountains, Canada
Registered: May 2002
|
Re: 6 speed for a celica
|
Fri, 17 December 2004 06:19
|
|
ddeane wrote on Fri, 17 December 2004 16:06 | The search reference is corrupt, so do a search on ddeane in tech and conversions and look at the 4th item down about 21 August.
|
Ok, found it, thanks.
That is for putting it behind a 1G right? not a 2T/3T like the subject says?
Also, how much further back is the shifter compared to stock?
|
|
|