F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3S-GTE rebuild parts Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
rokusan Regular Location: western queensland Registered: September 2004	3S-GTE rebuild parts Thu, 30 December 2004 13:33 i searched old threads on this subject but i have more questions I have started putting together my engine, and i have snapped and stretched two main cap bolts, so i am buying new ones from Toyota. Is this sufficient and should i buy new rod bolts too? I will be giving this engine a hard time so is there anything i have missed? List so far, bored & honed block, decked (skimed?) bal. crank, std rods and forged ACL's new bearings, head studs, rcoed head with good stuff (ta josh) also can i use the 205 steel headgasket on a 185/mr2 engine? any past experiences and known weaknesses would be appreciated. [Report message to a moderator]

	Subject	Poster	Date
	3S-GTE rebuild parts	rokusan	Thu, 30 December 2004 13:33
	Re: 3S-GTE rebuild parts	TA22-3SGTE	Thu, 30 December 2004 21:01
	Re: 3S-GTE rebuild parts	rokusan	Mon, 03 January 2005 01:59
	Re: 3S-GTE rebuild parts	-==L=a=N=c=E==-	Mon, 03 January 2005 11:02
	Re: 3S-GTE rebuild parts	rokusan	Thu, 20 January 2005 09:23
	Re: 3S-GTE rebuild parts	-==L=a=N=c=E==-	Thu, 20 January 2005 09:30
	Re: 3S-GTE rebuild parts	rokusan	Thu, 20 January 2005 09:39
	Re: 3S-GTE rebuild parts	off-road	Thu, 20 January 2005 11:38
	Re: 3S-GTE rebuild parts	rokusan	Wed, 26 January 2005 01:26

Previous Topic:	Advice on driving a VERY cammy car.
Next Topic:	4age 20v silver

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.