Author | Topic |
Location: Melbourne
Registered: March 2003
|
T04e, 1G Parts, MA Torsen W58 -
|
Thu, 16 December 2004 13:02
|
|
T04e also for sale $600. Checked by Max at ATS. a/r .5 compr a/r .48 rear housing.
Good for 2 litre engine, for 200rwkw.
Ok, i have had a clean up and added the parts left over from the car. Make an offer on the loose parts.
Gen 3 Injectors and rail ( green )
Cam gear cover.
Throttle body gen 3
Power steering pump.
Auto Ecu.
Engine Ecu (bought as Gen two Manual ECU)
Set of leads
Torsen Diff shown $450, As bought form Justen GT
I bought this diff a while back from Justen GT.
Just want to get my money back on it.
Paid $450
I think he said the ratio was 4.1:1
Reason for sale. Sold the Gz Soarer, to a young girl that wanted a cheaper car, = no performace parts.
[color=darkblue]Spare gearbox also added to the sale.
Its a W58 with a worn clutch and pressure plate, includes cut and shut shifter( not great), NO CLUTCH FORK, and to make it worse, NO SPEEDO.
I robbed this box for my good one. I had this in originally, but had to remove the rear housing to remove speedo. Yes it was in that tight!!!
Ideal for a spare for someone that has the clutch and speedo!
$300.ono Melb buyers.
|
Attachment: W58.jpg
(Size: 72.33KB, Downloaded 474 time(s)) |
|
Attachment: Front.jpg
(Size: 65.94KB, Downloaded 310 time(s)) |
|
Attachment: Parts.jpg
(Size: 72.78KB, Downloaded 308 time(s)) |
[Updated on: Wed, 05 January 2005 09:52]
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: FS Torsen Diff from GZ 20
|
Thu, 16 December 2004 23:38
|
|
This would make a great centre for any person with a g series diff.
|
|
|
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20
|
Sat, 18 December 2004 21:44
|
|
I have one in my car now. Incredible.
|
|
|
Location: Arthurs Creek, Victoria
Registered: May 2002
|
Re: FS Torsen Diff from GZ 20
|
Sun, 19 December 2004 07:58
|
|
I assume this will bolt into a g series RN27 diff?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20
|
Wed, 22 December 2004 12:14
|
|
I couldn't tell you.
I have been told that it fits Ma70 and JZA 70 but i have no idea about anything else.
|
|
|
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20
|
Wed, 22 December 2004 12:20
|
|
If it's G series it will fit into your GZ/MZ Soarer or MA70 Supra. As long as your diff housing is a G series which should be stated on the build plate under axle code.
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: FS Torsen Diff from GZ 20
|
Wed, 22 December 2004 23:27
|
|
Some1 obviously didnt listen to what i told him. /me coughs in Stradlaters direction
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: FS Torsen Diff from GZ 20
|
Thu, 23 December 2004 01:09
|
|
People have fitted Supra diff centres to Hilux diffs, so yes.
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20 W58 - 1G box
|
Thu, 30 December 2004 09:27
|
|
Spare gearbox also added to the sale.
Its a W58 with a worn clutch and pressure plate, includes cut and shut shifter( not great), NO CLUTCH FORK, and to make it worse, NO SPEEDO.
I robbed this box for my good one. I had this in originally, but had to remove the rear housing to remove speedo. Yes it was in that tight!!!
Ideal for a spare for someone that has the clutch and speedo!
$350.ono
Melb buyers.
See the pics at the start of the thread
|
|
|
Location: melbourne SE.
Registered: September 2002
|
Re: FS Torsen Diff from GZ 20 W58 - 1G box
|
Sun, 02 January 2005 00:18
|
|
Do you have a 1g flywheel, if so how much! thanks sam
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20 W58 - 1G box
|
Sun, 02 January 2005 01:39
|
|
No Flywheel, Sorry.
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20 W58 - 1G box
|
Sun, 02 January 2005 02:07
|
|
Parts ADDED.
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS Torsen Diff from GZ 20 W58 - 1G box
|
Tue, 04 January 2005 07:16
|
|
W58 now $300 ono
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Tue, 04 January 2005 12:19
|
|
$350 for the diff?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Tue, 04 January 2005 12:41
|
|
Well its the first offer....
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Tue, 04 January 2005 12:44
|
|
its pretty much all i can afford for something thats gonna lie around for another 12 months before i use it....
|
|
|
Location: Bayside Melbourne.
Registered: May 2003
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Tue, 04 January 2005 15:04
|
|
In regards to the diff, I'll do some research and thinking and get back to you in a day with an offer.
I am of the understanding that the Cressidas have a G series diff and therefore would work. I don't know what the ratio is off hand though. That is what I need to verify...
...and also whether or not I really need an LSD.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Wed, 05 January 2005 07:32
|
|
acmtt how worn is the clutch?
does it slip?
would you like to sell it?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Wed, 05 January 2005 09:57
|
|
I have added the turbo as well.
Pic in the first post.
T04e checked by Max at ATS in Melb.
Good for a 2litre and 200rwkw
Still got the 7m 440 injectors as well.
Ahh it would have been so nice, but.....
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: FS 1G Parts, MA Torsen Diff, W58 - 1G box
|
Wed, 05 January 2005 10:01
|
|
Hmmm the clutch is only ok, not a lot of meat on it. Its just there to sweeten the deal on the box. Also what would i do with it now?
|
|
|
Location: cronulla
Registered: September 2002
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:07
|
|
Ive sent u a pm regarding the turbo
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:12
|
|
Replied.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:17
|
|
okdo you want to sell me te 7MGTE injectors then?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:21
|
|
Yep.
They were cleaned and flowed 440cc. all flowed 100%.
They come with new O rings on them, so just drop them in. Do you have aftermarket fuel management of some kind to trim the fuel back for low revs?
$300.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:25
|
|
sorry man i cant affor that, nearly everything has been bought and i thinkim gonna have to go for some second hand ones
i will have emanage yes
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:31
|
|
Sorry mate, but these are second hand! I bought them from John at Import bits for $275 and paid $165 for the clean , flow test and new filters and O rings.
I have E-Manage in my JZZ30, its a good value for money unit.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 10:38
|
|
yeah emanage rocks
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 13:13
|
|
interested in turbo and lsd now...how many km on the turbo?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 13:21
|
|
I have no idea on the km on the turbo as it never made it onto my car.
Thats why i got it checked out by ATS. Melb.
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 13:54
|
|
is it too small for a 7m?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 14:08
|
|
I think it would be to small.
Suits a 2L well, a 2.5 l ok, 3 L ....NO
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 14:15
|
|
so are you gonna accept my offer of 350 for the diff?
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 14:20
|
|
Lets see what Simdog offers. I prefer selling locally, you can inspect and buy it kowing all the details. $350 is too low. Its worth $450, i am just selling it at a time when no one is chasing one.
Ring a wrecker and you will find out how much they want, and then pay me $450 hehehe
Cheers
Andrew
|
|
|
Location: Brisbane
Registered: June 2003
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Wed, 05 January 2005 14:30
|
|
Hmmm Lets see.
1 - i havent even seen it, so i dont know its condition.
My post "I prefer selling locally, you can inspect and buy it kowing all the details. "
2 - wreckers are a rip off, and i was quoted $410 for one there
You should buy it. Its closer, adn you can inspect it.
3 - itll cost an arm and a leg to post it here
You are correct, but they are your arms adn legs
|
|
|
Location: Sydney
Registered: May 2002
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Thu, 06 January 2005 01:34
|
|
Hang in there mate if you're not in a hurry - I sold my G series Torsen for $475 on here in less than 2 weeks.
They're becoming a lot more desirable than the older clutch LSDs as they don't wear and are almost indestructible.
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Thu, 06 January 2005 10:13
|
|
Turbo SOLD
|
|
|
Location: Bayside Melbourne.
Registered: May 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Thu, 06 January 2005 12:48
|
|
Sorry buddy but I am not gonna offer on this one. Sorry to keep you hanging but it just wasn't gonna work for me. The Cressida runs a 3.9:1 ratio. I also did some research and decided that I want the stock Cressida clutch type LSD instead of a torsen.
Manny wrote on Thu, 06 January 2005 12:34 | They're becoming a lot more desirable than the older clutch LSDs as they don't wear and are almost indestructible.
|
Well I want a clutch type one.
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Thu, 06 January 2005 13:06
|
|
No worries mate.
It will find a home eventually.
|
|
|
Location: Brisbane
Registered: June 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Fri, 07 January 2005 07:53
|
|
pm'd
|
|
|
Location: Melbourne
Registered: March 2003
|
Re: T04e, 1G Parts, MA Torsen W58 -
|
Tue, 18 January 2005 11:18
|
|
W58 SOLD
DIff SOLD
Parts..maybe
|
|
|