| Author | Topic |
|---|
Location:
townsville NQLD
Registered:
February 2004
|
|
18r-g aircon setup, will this work??
|
Wed, 19 January 2005 09:38
|
 |
hi,
i have been fidling around tryin to organise a suitable setup to have the 18r-c compressor on the 18r-g. mounting the compressor wont be a problem, but having a suitable belt setup that will work is a bit of work.
the way i have it experimentally setup at the moment is,
pulley1: (the inner pulley) just running the alternator alone.
pulley2: (the outer/3rd pulley) runs over the outer pulley on the water pump, then around the compressor.
now to have the belt connected from the crankshaft pulley to the alternator, i had to machine off the "bigger" pulley on the water pump so that the outside of the belt wouldnt rub.
i then had to space the water pump out by using 2 washers behind the pulley on each bolt (will make proper spacer on lathe later).
my question is;
seeing as the outer pulley on the water pump is smaller than the inner one, will this make it spin too fast???
also, is there enough belt-to-pulley contact on the water pump?? (belt is loose in photo though)
also, will there be too much flex in the belt?? should i use a guide???
if it is any significance, im runnin a thermo fan.
here are the pics
** origional image deleted so page can download quicker**
thanx
brett
[Updated on: Sat, 22 January 2005 11:18]
|
|
|
| | Subject | Poster | Date |
|---|
 |
18r-g aircon setup, will this work??
|
brett_celicacoupe | Wed, 19 January 2005 09:38 |
|
Re: 18r-g aircon setup, will this work??
|
thechuckster | Wed, 19 January 2005 10:37 |
|
Re: 18r-g aircon setup, will this work??
|
brett_celicacoupe | Wed, 19 January 2005 10:43 |
|
Re: 18r-g aircon setup, will this work??
|
thechuckster | Wed, 19 January 2005 11:00 |
|
Re: 18r-g aircon setup, will this work??
|
Mr DOHC | Wed, 19 January 2005 12:01 |
|
Re: 18r-g aircon setup, will this work??
|
THE WITZL | Wed, 19 January 2005 21:04 |
|
Re: 18r-g aircon setup, will this work??
|
river | Thu, 20 January 2005 04:40 |
|
Re: 18r-g aircon setup, will this work??
|
brett_celicacoupe | Thu, 20 January 2005 11:26 |
|
Re: 18r-g aircon setup, will this work??
|
brett_celicacoupe | Sat, 22 January 2005 11:16 |
|
Re: 18r-g aircon setup, will this work??
|
river | Sun, 23 January 2005 06:12 |
